- dns-wg - mailman.ripe.net

Majordomo results: Re: TICKET# 009041 [Global-Marketplace]
by Majordomo＠tradinghouse.com 19 Dec '97

19 Dec '97

-- >>>> This is to confirm that your message has been received by **** Command 'this' not recognized. >>>> Island Internet's support department. **** Command 'island' not recognized. >>>> >>>> Thank you, **** Command 'thank' not recognized. >>>> Island Internet **** Command 'island' not recognized. >>>> >>>> **** No valid commands found. **** Commands must be in message BODY, not in HEADER. **** Help for Majordomo(a)tradinghouse.com: This help message is being sent to you from the Majordomo mailing list management system at Majordomo(a)tradinghouse.com. This is version 1.94.3 of Majordomo. If you're familiar with mail servers, an advanced user's summary of Majordomo's commands appears at the end of this message. Majordomo is an automated system which allows users to subscribe and unsubscribe to mailing lists, and to retrieve files from list archives. You can interact with the Majordomo software by sending it commands in the body of mail messages addressed to "Majordomo(a)tradinghouse.com". Please do not put your commands on the subject line; Majordomo does not process commands in the subject line. You may put multiple Majordomo commands in the same mail message. Put each command on a line by itself. If you use a "signature block" at the end of your mail, Majordomo may mistakenly believe each line of your message is a command; you will then receive spurious error messages. To keep this from happening, either put a line starting with a hyphen ("-") before your signature, or put a line with just the word end on it in the same place. This will stop the Majordomo software from processing your signature as bad commands. Here are some of the things you can do using Majordomo: I. FINDING OUT WHICH LISTS ARE ON THIS SYSTEM To get a list of publicly-available mailing lists on this system, put the following line in the body of your mail message to Majordomo(a)tradinghouse.com: lists Each line will contain the name of a mailing list and a brief description of the list. To get more information about a particular list, use the "info" command, supplying the name of the list. For example, if the name of the list about which you wish information is "demo-list", you would put the line info demo-list in the body of the mail message. II. SUBSCRIBING TO A LIST Once you've determined that you wish to subscribe to one or more lists on this system, you can send commands to Majordomo to have it add you to the list, so you can begin receiving mailings. To receive list mail at the address from which you're sending your mail, simply say "subscribe" followed by the list's name: subscribe demo-list If for some reason you wish to have the mailings go to a different address (a friend's address, a specific other system on which you have an account, or an address which is more correct than the one that automatically appears in the "From:" header on the mail you send), you would add that address to the command. For instance, if you're sending a request from your work account, but wish to receive "demo-list" mail at your personal account (for which we will use "jqpublic(a)my-isp.com" as an example), you'd put the line subscribe demo-list jqpublic(a)my-isp.com in the mail message body. Based on configuration decisions made by the list owners, you may be added to the mailing list automatically. You may also receive notification that an authorization key is required for subscription. Another message will be sent to the address to be subscribed (which may or may not be the same as yours) containing the key, and directing the user to send a command found in that message back to Majordomo(a)tradinghouse.com. (This can be a bit of extra hassle, but it helps keep you from being swamped in extra email by someone who forged requests from your address.) You may also get a message that your subscription is being forwarded to the list owner for approval; some lists have waiting lists, or policies about who may subscribe. If your request is forwarded for approval, the list owner should contact you soon after your request. Upon subscribing, you should receive an introductory message, containing list policies and features. Save this message for future reference; it will also contain exact directions for unsubscribing. If you lose the intro mail and would like another copy of the policies, send this message to Majordomo(a)tradinghouse.com: intro demo-list (substituting, of course, the real name of your list for "demo-list"). III. UNSUBSCRIBING FROM MAILING LISTS Your original intro message contains the exact command which should be used to remove your address from the list. However, in most cases, you may simply send the command "unsubscribe" followed by the list name: unsubscribe demo-list (This command may fail if your provider has changed the way your address is shown in your mail.) To remove an address other than the one from which you're sending the request, give that address in the command: unsubscribe demo-list jqpublic(a)my-isp.com In either of these cases, you can tell Majordomo(a)tradinghouse.com to remove the address in question from all lists on this server by using "*" in place of the list name: unsubscribe * unsubscribe * jqpublic(a)my-isp.com IV. FINDING THE LISTS TO WHICH AN ADDRESS IS SUBSCRIBED To find the lists to which your address is subscribed, send this command in the body of a mail message to Majordomo(a)tradinghouse.com: which You can look for other addresses, or parts of an address, by specifying the text for which Majordomo should search. For instance, to find which users at my-isp.com are subscribed to which lists, you might send the command which my-isp.com Note that many list owners completely or fully disable the "which" command, considering it a privacy violation. V. FINDING OUT WHO'S SUBSCRIBED TO A LIST To get a list of the addresses on a particular list, you may use the "who" command, followed by the name of the list: who demo-list Note that many list owners allow only a list's subscribers to use the "who" command, or disable it completely, believing it to be a privacy violation. VI. RETRIEVING FILES FROM A LIST'S ARCHIVES Many list owners keep archives of files associated with a list. These may include: - back issues of the list - help files, user profiles, and other documents associated with the list - daily, monthly, or yearly archives for the list To find out if a list has any files associated with it, use the "index" command: index demo-list If you see files in which you're interested, you may retrieve them by using the "get" command and specifying the list name and archive filename. For instance, to retrieve the files called "profile.form" (presumably a form to fill out with your profile) and "demo-list.9611" (presumably the messages posted to the list in November 1996), you would put the lines get demo-list profile.form get demo-list demo-list.9611 in your mail to Majordomo(a)tradinghouse.com. VII. GETTING MORE HELP To contact a human site manager, send mail to Majordomo-Owner(a)tradinghouse.com. To contact the owner of a specific list, send mail to that list's approval address, which is formed by adding "-approval" to the user-name portion of the list's address. For instance, to contact the list owner for demo-list(a)tradinghouse.com, you would send mail to demo-list-approval(a)tradinghouse.com. To get another copy of this help message, send mail to Majordomo(a)tradinghouse.com with a line saying help in the message body. VIII. COMMAND SUMMARY FOR ADVANCED USERS In the description below items contained in []'s are optional. When providing the item, do not include the []'s around it. Items in angle brackets, such as <address>, are meta-symbols that should be replaced by appropriate text without the angle brackets. It understands the following commands: subscribe <list> [<address>] Subscribe yourself (or <address> if specified) to the named <list>. unsubscribe <list> [<address>] Unsubscribe yourself (or <address> if specified) from the named <list>. "unsubscribe *" will remove you (or <address>) from all lists. This _may not_ work if you have subscribed using multiple addresses. get <list> <filename> Get a file related to <list>. index <list> Return an index of files you can "get" for <list>. which [<address>] Find out which lists you (or <address> if specified) are on. who <list> Find out who is on the named <list>. info <list> Retrieve the general introductory information for the named <list>. intro <list> Retrieve the introductory message sent to new users. Non-subscribers may not be able to retrieve this. lists Show the lists served by this Majordomo server. help Retrieve this message. end Stop processing commands (useful if your mailer adds a signature). Commands should be sent in the body of an email message to "Majordomo(a)tradinghouse.com". Multiple commands can be processed provided each occurs on a separate line. Commands in the "Subject:" line are NOT processed. If you have any questions or problems, please contact "Majordomo-Owner(a)tradinghouse.com".

1 0

Majordomo results: Re: TICKET# 009041 [Global-Marketplace]
by Majordomo＠tradinghouse.com 19 Dec '97

19 Dec '97

-- >>>> This is to confirm that your message has been received by **** Command 'this' not recognized. >>>> Island Internet's support department. **** Command 'island' not recognized. >>>> >>>> Thank you, **** Command 'thank' not recognized. >>>> Island Internet **** Command 'island' not recognized. >>>> >>>> **** No valid commands found. **** Commands must be in message BODY, not in HEADER. **** Help for Majordomo(a)tradinghouse.com: This help message is being sent to you from the Majordomo mailing list management system at Majordomo(a)tradinghouse.com. This is version 1.94.3 of Majordomo. If you're familiar with mail servers, an advanced user's summary of Majordomo's commands appears at the end of this message. Majordomo is an automated system which allows users to subscribe and unsubscribe to mailing lists, and to retrieve files from list archives. You can interact with the Majordomo software by sending it commands in the body of mail messages addressed to "Majordomo(a)tradinghouse.com". Please do not put your commands on the subject line; Majordomo does not process commands in the subject line. You may put multiple Majordomo commands in the same mail message. Put each command on a line by itself. If you use a "signature block" at the end of your mail, Majordomo may mistakenly believe each line of your message is a command; you will then receive spurious error messages. To keep this from happening, either put a line starting with a hyphen ("-") before your signature, or put a line with just the word end on it in the same place. This will stop the Majordomo software from processing your signature as bad commands. Here are some of the things you can do using Majordomo: I. FINDING OUT WHICH LISTS ARE ON THIS SYSTEM To get a list of publicly-available mailing lists on this system, put the following line in the body of your mail message to Majordomo(a)tradinghouse.com: lists Each line will contain the name of a mailing list and a brief description of the list. To get more information about a particular list, use the "info" command, supplying the name of the list. For example, if the name of the list about which you wish information is "demo-list", you would put the line info demo-list in the body of the mail message. II. SUBSCRIBING TO A LIST Once you've determined that you wish to subscribe to one or more lists on this system, you can send commands to Majordomo to have it add you to the list, so you can begin receiving mailings. To receive list mail at the address from which you're sending your mail, simply say "subscribe" followed by the list's name: subscribe demo-list If for some reason you wish to have the mailings go to a different address (a friend's address, a specific other system on which you have an account, or an address which is more correct than the one that automatically appears in the "From:" header on the mail you send), you would add that address to the command. For instance, if you're sending a request from your work account, but wish to receive "demo-list" mail at your personal account (for which we will use "jqpublic(a)my-isp.com" as an example), you'd put the line subscribe demo-list jqpublic(a)my-isp.com in the mail message body. Based on configuration decisions made by the list owners, you may be added to the mailing list automatically. You may also receive notification that an authorization key is required for subscription. Another message will be sent to the address to be subscribed (which may or may not be the same as yours) containing the key, and directing the user to send a command found in that message back to Majordomo(a)tradinghouse.com. (This can be a bit of extra hassle, but it helps keep you from being swamped in extra email by someone who forged requests from your address.) You may also get a message that your subscription is being forwarded to the list owner for approval; some lists have waiting lists, or policies about who may subscribe. If your request is forwarded for approval, the list owner should contact you soon after your request. Upon subscribing, you should receive an introductory message, containing list policies and features. Save this message for future reference; it will also contain exact directions for unsubscribing. If you lose the intro mail and would like another copy of the policies, send this message to Majordomo(a)tradinghouse.com: intro demo-list (substituting, of course, the real name of your list for "demo-list"). III. UNSUBSCRIBING FROM MAILING LISTS Your original intro message contains the exact command which should be used to remove your address from the list. However, in most cases, you may simply send the command "unsubscribe" followed by the list name: unsubscribe demo-list (This command may fail if your provider has changed the way your address is shown in your mail.) To remove an address other than the one from which you're sending the request, give that address in the command: unsubscribe demo-list jqpublic(a)my-isp.com In either of these cases, you can tell Majordomo(a)tradinghouse.com to remove the address in question from all lists on this server by using "*" in place of the list name: unsubscribe * unsubscribe * jqpublic(a)my-isp.com IV. FINDING THE LISTS TO WHICH AN ADDRESS IS SUBSCRIBED To find the lists to which your address is subscribed, send this command in the body of a mail message to Majordomo(a)tradinghouse.com: which You can look for other addresses, or parts of an address, by specifying the text for which Majordomo should search. For instance, to find which users at my-isp.com are subscribed to which lists, you might send the command which my-isp.com Note that many list owners completely or fully disable the "which" command, considering it a privacy violation. V. FINDING OUT WHO'S SUBSCRIBED TO A LIST To get a list of the addresses on a particular list, you may use the "who" command, followed by the name of the list: who demo-list Note that many list owners allow only a list's subscribers to use the "who" command, or disable it completely, believing it to be a privacy violation. VI. RETRIEVING FILES FROM A LIST'S ARCHIVES Many list owners keep archives of files associated with a list. These may include: - back issues of the list - help files, user profiles, and other documents associated with the list - daily, monthly, or yearly archives for the list To find out if a list has any files associated with it, use the "index" command: index demo-list If you see files in which you're interested, you may retrieve them by using the "get" command and specifying the list name and archive filename. For instance, to retrieve the files called "profile.form" (presumably a form to fill out with your profile) and "demo-list.9611" (presumably the messages posted to the list in November 1996), you would put the lines get demo-list profile.form get demo-list demo-list.9611 in your mail to Majordomo(a)tradinghouse.com. VII. GETTING MORE HELP To contact a human site manager, send mail to Majordomo-Owner(a)tradinghouse.com. To contact the owner of a specific list, send mail to that list's approval address, which is formed by adding "-approval" to the user-name portion of the list's address. For instance, to contact the list owner for demo-list(a)tradinghouse.com, you would send mail to demo-list-approval(a)tradinghouse.com. To get another copy of this help message, send mail to Majordomo(a)tradinghouse.com with a line saying help in the message body. VIII. COMMAND SUMMARY FOR ADVANCED USERS In the description below items contained in []'s are optional. When providing the item, do not include the []'s around it. Items in angle brackets, such as <address>, are meta-symbols that should be replaced by appropriate text without the angle brackets. It understands the following commands: subscribe <list> [<address>] Subscribe yourself (or <address> if specified) to the named <list>. unsubscribe <list> [<address>] Unsubscribe yourself (or <address> if specified) from the named <list>. "unsubscribe *" will remove you (or <address>) from all lists. This _may not_ work if you have subscribed using multiple addresses. get <list> <filename> Get a file related to <list>. index <list> Return an index of files you can "get" for <list>. which [<address>] Find out which lists you (or <address> if specified) are on. who <list> Find out who is on the named <list>. info <list> Retrieve the general introductory information for the named <list>. intro <list> Retrieve the introductory message sent to new users. Non-subscribers may not be able to retrieve this. lists Show the lists served by this Majordomo server. help Retrieve this message. end Stop processing commands (useful if your mailer adds a signature). Commands should be sent in the body of an email message to "Majordomo(a)tradinghouse.com". Multiple commands can be processed provided each occurs on a separate line. Commands in the "Subject:" line are NOT processed. If you have any questions or problems, please contact "Majordomo-Owner(a)tradinghouse.com".

1 0

Majordomo results: Re: TICKET# 009041 [Global-Marketplace]
by Majordomo＠tradinghouse.com 19 Dec '97

19 Dec '97

-- >>>> This is to confirm that your message has been received by **** Command 'this' not recognized. >>>> Island Internet's support department. **** Command 'island' not recognized. >>>> >>>> Thank you, **** Command 'thank' not recognized. >>>> Island Internet **** Command 'island' not recognized. >>>> >>>> **** No valid commands found. **** Commands must be in message BODY, not in HEADER. **** Help for Majordomo(a)tradinghouse.com: This help message is being sent to you from the Majordomo mailing list management system at Majordomo(a)tradinghouse.com. This is version 1.94.3 of Majordomo. If you're familiar with mail servers, an advanced user's summary of Majordomo's commands appears at the end of this message. Majordomo is an automated system which allows users to subscribe and unsubscribe to mailing lists, and to retrieve files from list archives. You can interact with the Majordomo software by sending it commands in the body of mail messages addressed to "Majordomo(a)tradinghouse.com". Please do not put your commands on the subject line; Majordomo does not process commands in the subject line. You may put multiple Majordomo commands in the same mail message. Put each command on a line by itself. If you use a "signature block" at the end of your mail, Majordomo may mistakenly believe each line of your message is a command; you will then receive spurious error messages. To keep this from happening, either put a line starting with a hyphen ("-") before your signature, or put a line with just the word end on it in the same place. This will stop the Majordomo software from processing your signature as bad commands. Here are some of the things you can do using Majordomo: I. FINDING OUT WHICH LISTS ARE ON THIS SYSTEM To get a list of publicly-available mailing lists on this system, put the following line in the body of your mail message to Majordomo(a)tradinghouse.com: lists Each line will contain the name of a mailing list and a brief description of the list. To get more information about a particular list, use the "info" command, supplying the name of the list. For example, if the name of the list about which you wish information is "demo-list", you would put the line info demo-list in the body of the mail message. II. SUBSCRIBING TO A LIST Once you've determined that you wish to subscribe to one or more lists on this system, you can send commands to Majordomo to have it add you to the list, so you can begin receiving mailings. To receive list mail at the address from which you're sending your mail, simply say "subscribe" followed by the list's name: subscribe demo-list If for some reason you wish to have the mailings go to a different address (a friend's address, a specific other system on which you have an account, or an address which is more correct than the one that automatically appears in the "From:" header on the mail you send), you would add that address to the command. For instance, if you're sending a request from your work account, but wish to receive "demo-list" mail at your personal account (for which we will use "jqpublic(a)my-isp.com" as an example), you'd put the line subscribe demo-list jqpublic(a)my-isp.com in the mail message body. Based on configuration decisions made by the list owners, you may be added to the mailing list automatically. You may also receive notification that an authorization key is required for subscription. Another message will be sent to the address to be subscribed (which may or may not be the same as yours) containing the key, and directing the user to send a command found in that message back to Majordomo(a)tradinghouse.com. (This can be a bit of extra hassle, but it helps keep you from being swamped in extra email by someone who forged requests from your address.) You may also get a message that your subscription is being forwarded to the list owner for approval; some lists have waiting lists, or policies about who may subscribe. If your request is forwarded for approval, the list owner should contact you soon after your request. Upon subscribing, you should receive an introductory message, containing list policies and features. Save this message for future reference; it will also contain exact directions for unsubscribing. If you lose the intro mail and would like another copy of the policies, send this message to Majordomo(a)tradinghouse.com: intro demo-list (substituting, of course, the real name of your list for "demo-list"). III. UNSUBSCRIBING FROM MAILING LISTS Your original intro message contains the exact command which should be used to remove your address from the list. However, in most cases, you may simply send the command "unsubscribe" followed by the list name: unsubscribe demo-list (This command may fail if your provider has changed the way your address is shown in your mail.) To remove an address other than the one from which you're sending the request, give that address in the command: unsubscribe demo-list jqpublic(a)my-isp.com In either of these cases, you can tell Majordomo(a)tradinghouse.com to remove the address in question from all lists on this server by using "*" in place of the list name: unsubscribe * unsubscribe * jqpublic(a)my-isp.com IV. FINDING THE LISTS TO WHICH AN ADDRESS IS SUBSCRIBED To find the lists to which your address is subscribed, send this command in the body of a mail message to Majordomo(a)tradinghouse.com: which You can look for other addresses, or parts of an address, by specifying the text for which Majordomo should search. For instance, to find which users at my-isp.com are subscribed to which lists, you might send the command which my-isp.com Note that many list owners completely or fully disable the "which" command, considering it a privacy violation. V. FINDING OUT WHO'S SUBSCRIBED TO A LIST To get a list of the addresses on a particular list, you may use the "who" command, followed by the name of the list: who demo-list Note that many list owners allow only a list's subscribers to use the "who" command, or disable it completely, believing it to be a privacy violation. VI. RETRIEVING FILES FROM A LIST'S ARCHIVES Many list owners keep archives of files associated with a list. These may include: - back issues of the list - help files, user profiles, and other documents associated with the list - daily, monthly, or yearly archives for the list To find out if a list has any files associated with it, use the "index" command: index demo-list If you see files in which you're interested, you may retrieve them by using the "get" command and specifying the list name and archive filename. For instance, to retrieve the files called "profile.form" (presumably a form to fill out with your profile) and "demo-list.9611" (presumably the messages posted to the list in November 1996), you would put the lines get demo-list profile.form get demo-list demo-list.9611 in your mail to Majordomo(a)tradinghouse.com. VII. GETTING MORE HELP To contact a human site manager, send mail to Majordomo-Owner(a)tradinghouse.com. To contact the owner of a specific list, send mail to that list's approval address, which is formed by adding "-approval" to the user-name portion of the list's address. For instance, to contact the list owner for demo-list(a)tradinghouse.com, you would send mail to demo-list-approval(a)tradinghouse.com. To get another copy of this help message, send mail to Majordomo(a)tradinghouse.com with a line saying help in the message body. VIII. COMMAND SUMMARY FOR ADVANCED USERS In the description below items contained in []'s are optional. When providing the item, do not include the []'s around it. Items in angle brackets, such as <address>, are meta-symbols that should be replaced by appropriate text without the angle brackets. It understands the following commands: subscribe <list> [<address>] Subscribe yourself (or <address> if specified) to the named <list>. unsubscribe <list> [<address>] Unsubscribe yourself (or <address> if specified) from the named <list>. "unsubscribe *" will remove you (or <address>) from all lists. This _may not_ work if you have subscribed using multiple addresses. get <list> <filename> Get a file related to <list>. index <list> Return an index of files you can "get" for <list>. which [<address>] Find out which lists you (or <address> if specified) are on. who <list> Find out who is on the named <list>. info <list> Retrieve the general introductory information for the named <list>. intro <list> Retrieve the introductory message sent to new users. Non-subscribers may not be able to retrieve this. lists Show the lists served by this Majordomo server. help Retrieve this message. end Stop processing commands (useful if your mailer adds a signature). Commands should be sent in the body of an email message to "Majordomo(a)tradinghouse.com". Multiple commands can be processed provided each occurs on a separate line. Commands in the "Subject:" line are NOT processed. If you have any questions or problems, please contact "Majordomo-Owner(a)tradinghouse.com".

1 0

Majordomo results: TICKET# 009041 [Global-Marketplace] Free
by Majordomo＠tradinghouse.com 19 Dec '97

19 Dec '97

-- >>>> This is to confirm that your message has been received by **** Command 'this' not recognized. >>>> Island Internet's support department. **** Command 'island' not recognized. >>>> >>>> If you have any other questions about this problem, or call our **** Command 'if' not recognized. >>>> technical support line, please be sure to refer to the ticket number **** Command 'technical' not recognized. >>>> that is given in the subject of this message. **** Command 'that' not recognized. >>>> >>>> When replying to messages that contain a ticket number in the subject **** Command 'when' not recognized. >>>> line, please do not remove the ticket number as this refers to this **** Command 'line,' not recognized. >>>> particular support problem. **** Command 'particular' not recognized. >>>> >>>> If you were replying to a previously opened ticket, and you have been **** Command 'if' not recognized. >>>> returned a NEW ticket number, this means the old ticket is closed and **** Command 'returned' not recognized. >>>> you have been assigned a new ticket number. **** Command 'you' not recognized. >>>> >>>> Thank you, **** Command 'thank' not recognized. >>>> Island Internet **** Command 'island' not recognized. >>>> >>>> **** No valid commands found. **** Commands must be in message BODY, not in HEADER. **** Help for Majordomo(a)tradinghouse.com: This help message is being sent to you from the Majordomo mailing list management system at Majordomo(a)tradinghouse.com. This is version 1.94.3 of Majordomo. If you're familiar with mail servers, an advanced user's summary of Majordomo's commands appears at the end of this message. Majordomo is an automated system which allows users to subscribe and unsubscribe to mailing lists, and to retrieve files from list archives. You can interact with the Majordomo software by sending it commands in the body of mail messages addressed to "Majordomo(a)tradinghouse.com". Please do not put your commands on the subject line; Majordomo does not process commands in the subject line. You may put multiple Majordomo commands in the same mail message. Put each command on a line by itself. If you use a "signature block" at the end of your mail, Majordomo may mistakenly believe each line of your message is a command; you will then receive spurious error messages. To keep this from happening, either put a line starting with a hyphen ("-") before your signature, or put a line with just the word end on it in the same place. This will stop the Majordomo software from processing your signature as bad commands. Here are some of the things you can do using Majordomo: I. FINDING OUT WHICH LISTS ARE ON THIS SYSTEM To get a list of publicly-available mailing lists on this system, put the following line in the body of your mail message to Majordomo(a)tradinghouse.com: lists Each line will contain the name of a mailing list and a brief description of the list. To get more information about a particular list, use the "info" command, supplying the name of the list. For example, if the name of the list about which you wish information is "demo-list", you would put the line info demo-list in the body of the mail message. II. SUBSCRIBING TO A LIST Once you've determined that you wish to subscribe to one or more lists on this system, you can send commands to Majordomo to have it add you to the list, so you can begin receiving mailings. To receive list mail at the address from which you're sending your mail, simply say "subscribe" followed by the list's name: subscribe demo-list If for some reason you wish to have the mailings go to a different address (a friend's address, a specific other system on which you have an account, or an address which is more correct than the one that automatically appears in the "From:" header on the mail you send), you would add that address to the command. For instance, if you're sending a request from your work account, but wish to receive "demo-list" mail at your personal account (for which we will use "jqpublic(a)my-isp.com" as an example), you'd put the line subscribe demo-list jqpublic(a)my-isp.com in the mail message body. Based on configuration decisions made by the list owners, you may be added to the mailing list automatically. You may also receive notification that an authorization key is required for subscription. Another message will be sent to the address to be subscribed (which may or may not be the same as yours) containing the key, and directing the user to send a command found in that message back to Majordomo(a)tradinghouse.com. (This can be a bit of extra hassle, but it helps keep you from being swamped in extra email by someone who forged requests from your address.) You may also get a message that your subscription is being forwarded to the list owner for approval; some lists have waiting lists, or policies about who may subscribe. If your request is forwarded for approval, the list owner should contact you soon after your request. Upon subscribing, you should receive an introductory message, containing list policies and features. Save this message for future reference; it will also contain exact directions for unsubscribing. If you lose the intro mail and would like another copy of the policies, send this message to Majordomo(a)tradinghouse.com: intro demo-list (substituting, of course, the real name of your list for "demo-list"). III. UNSUBSCRIBING FROM MAILING LISTS Your original intro message contains the exact command which should be used to remove your address from the list. However, in most cases, you may simply send the command "unsubscribe" followed by the list name: unsubscribe demo-list (This command may fail if your provider has changed the way your address is shown in your mail.) To remove an address other than the one from which you're sending the request, give that address in the command: unsubscribe demo-list jqpublic(a)my-isp.com In either of these cases, you can tell Majordomo(a)tradinghouse.com to remove the address in question from all lists on this server by using "*" in place of the list name: unsubscribe * unsubscribe * jqpublic(a)my-isp.com IV. FINDING THE LISTS TO WHICH AN ADDRESS IS SUBSCRIBED To find the lists to which your address is subscribed, send this command in the body of a mail message to Majordomo(a)tradinghouse.com: which You can look for other addresses, or parts of an address, by specifying the text for which Majordomo should search. For instance, to find which users at my-isp.com are subscribed to which lists, you might send the command which my-isp.com Note that many list owners completely or fully disable the "which" command, considering it a privacy violation. V. FINDING OUT WHO'S SUBSCRIBED TO A LIST To get a list of the addresses on a particular list, you may use the "who" command, followed by the name of the list: who demo-list Note that many list owners allow only a list's subscribers to use the "who" command, or disable it completely, believing it to be a privacy violation. VI. RETRIEVING FILES FROM A LIST'S ARCHIVES Many list owners keep archives of files associated with a list. These may include: - back issues of the list - help files, user profiles, and other documents associated with the list - daily, monthly, or yearly archives for the list To find out if a list has any files associated with it, use the "index" command: index demo-list If you see files in which you're interested, you may retrieve them by using the "get" command and specifying the list name and archive filename. For instance, to retrieve the files called "profile.form" (presumably a form to fill out with your profile) and "demo-list.9611" (presumably the messages posted to the list in November 1996), you would put the lines get demo-list profile.form get demo-list demo-list.9611 in your mail to Majordomo(a)tradinghouse.com. VII. GETTING MORE HELP To contact a human site manager, send mail to Majordomo-Owner(a)tradinghouse.com. To contact the owner of a specific list, send mail to that list's approval address, which is formed by adding "-approval" to the user-name portion of the list's address. For instance, to contact the list owner for demo-list(a)tradinghouse.com, you would send mail to demo-list-approval(a)tradinghouse.com. To get another copy of this help message, send mail to Majordomo(a)tradinghouse.com with a line saying help in the message body. VIII. COMMAND SUMMARY FOR ADVANCED USERS In the description below items contained in []'s are optional. When providing the item, do not include the []'s around it. Items in angle brackets, such as <address>, are meta-symbols that should be replaced by appropriate text without the angle brackets. It understands the following commands: subscribe <list> [<address>] Subscribe yourself (or <address> if specified) to the named <list>. unsubscribe <list> [<address>] Unsubscribe yourself (or <address> if specified) from the named <list>. "unsubscribe *" will remove you (or <address>) from all lists. This _may not_ work if you have subscribed using multiple addresses. get <list> <filename> Get a file related to <list>. index <list> Return an index of files you can "get" for <list>. which [<address>] Find out which lists you (or <address> if specified) are on. who <list> Find out who is on the named <list>. info <list> Retrieve the general introductory information for the named <list>. intro <list> Retrieve the introductory message sent to new users. Non-subscribers may not be able to retrieve this. lists Show the lists served by this Majordomo server. help Retrieve this message. end Stop processing commands (useful if your mailer adds a signature). Commands should be sent in the body of an email message to "Majordomo(a)tradinghouse.com". Multiple commands can be processed provided each occurs on a separate line. Commands in the "Subject:" line are NOT processed. If you have any questions or problems, please contact "Majordomo-Owner(a)tradinghouse.com".

1 0

[Global-Marketplace] Free Subscription
by Global-Marketplace-Digest 19 Dec '97

19 Dec '97

Global-marketplace-digest is pleased to invite you to join a genuine emagazine for fresh trade inquiries worldwide from over 130 countries. Our subscribers are very serious business executives involved in all sectors of trade and industry and look forward to get new business opportunties through our digest sent by email. We monitor it very regularly and try hard to keep it open only for genuine businesses. If you are interested to subscribe you only have to send a new email message mailto:majordomo@tradinghouse.com Just write : subscribe global-marketplace-digest (DO NOT write anything else in subject or content area). If you are not sure if you wish to subscribe but want to know more details and a brief report on how to write a good trade offer/demand please write a message and mailto:majordomo@tradinghouse.com ONLY WRITE: info global-marketplace-digest Upon your message, you will receive a reply and confirmation and introduction to the digest with instructions on how to participate. If you do not wish to further receive any messages pls send a message to : nomail(a)tradinghouse.com We wish you a happy and prosperous new year if we dont hear from you. We apologize for any incovenience this mail may cause but if you are not interested please delete it. But we write you thinking you may benefit from this offer. Take care and wish you the best Global-Marketplace-digest

1 0

Re: InterNIC shutdown and TLDs/IN-ADDR ...
by Marcel Schneider 15 Dec '97

15 Dec '97

On Monday, 15 Dec 1997, Berislav Todorovic writes: > Hello, > The following banner can be found at the InterNIC FTP site: > 220- Please be advised that on March 31, 1998 InterNIC will be shutting > 220- down permanently and will no longer be in service.The databases that > 220- you own will need to be either moved to another location or put out > 220- of service. > 220- > 220- We apologize for this event but it will be the end of the InterNIC > 220- Cooperative Agreement that was funded by the National Science > 220- Foundation and AT&T. > I knew the fact that NSI lost its contract with the NSF from earlier. Any > comments on impacts of this shutdown on the root servers, in-addr.arpa > zone, nTLDs and gTLDs? IP address allocation and reverse lookup matters (IN-ADDR.ARPA) have been handed over to ARIN. This does not affect domain names, as far as I know, since this is not decided yet. US Gov is working on it. > Regards, > Beri > .-------. >| --+-- | Berislav Todorovic, B.Sc.E.E. | E-mail: beri(a)ubbg.etf.bg.ac.yu >| /|\ UBBG System administrator | >|-(-+-)-| School of Electrical Engineering | Phone: (+381-11) 3221-419 >| \|/ Bulevar Revolucije 73 | 3370-106 >| --+-- | 11000 Belgrade SERBIA, YUGOSLAVIA | Fax: (+381-11) 3248-681 > `-------' -------------------------------------------------------------------- Marcel

1 0

Lasers/Optics/Optical Tables - Save!
by 9JS0HDItz＠offsh1or.com 07 Dec '97

07 Dec '97

MWK INDUSTRIES SALE! JUST A QUICK LETTER TO SHOW YOU SOME LASERS- OPTICS AND OPTICAL TABLES SURPLUS THAT WE JUST RECEIVED. ITEM TRIMMU12 14 WATT ARGON LASER MADE FOR HEART SURGERY, TRIMEDYNE MODEL 900 TEMOO, POLORIZED,220VAC INPUT , WATER COOLED , FIBER LAUNCH, ALL ON ROLLAROUND CART EXCELENT FOR LAB USE, THE POWER WAS MEASURED AT 13 TO 14 WATTS. PRICE $9500 12 MONTH WARRANTEE. ITEM: COHERENT ARTICULATING ARM FROM A MODEL 451 CO2 MEDICAL LASER. ECCELLENT COND. $200 ITEM CO220A: CO2 LASER MADE BY PFIZER ,1990, FOR SURGERY, TATTOO REMOVAL ECT. 20 WATT OUTPUT , TESTED AND IN EXC. COND. 110 VAC INPUT, COST $40,000 NEW OUR PRICE 4,900. MODEL 20-C ITEM:PDA-1U1 SPECTRA PHYSICS QUANTRA RAY PULSED DYE LASER , GOOD FOR SPARE PARTS MODEL PDA-1 $500 ITEM NEWU1 NEWPORT OPTICAL TABLE 16" BY 36" 4" THICK, 1 " HOLE SPACING, COMES WITH A RUBBER ISOLATED TABLE STAND, NOT AIR SUPPORTED, $750 ITEM: HEPSN1 HELIUM NEON POWER SUPPLY KIT OPERATES UP TO A 15 mW LASER, INCLUDES ALL COMPONENTS AND PRINTED CIRCUIT BOARD, ALL YOU HAVE TO DO IS STUFF AND SOLDER THE CIRCUIT BOARD . 4" BY 3" BY 3", PRICE $75 ITEM HENEU12 1 TO 1.5 MW HE-NE LASER 632.8 nM INCLUDES 12VDC INPUT POWER SUPPLY ALL IN A PLASTIC HOUSING 6.25 IN. BY 1.375IN BY 2.25 IN. TEMOO,RANDOM POL. ,1.7 MR DIVERGENCE. 12 MONTH WARRANTEE , PRICE $45 ITEM MELU12 1 TO 2 mW HE-NE LASER 632.8 NM , PULLS FROM MEDICAL EQUIPMENT .EACH UNIT INCLUDES HE-NE HEAD AND POWER SUPPLY[110VAC INPUT]. ALL YOU NEED TO PROVIDE IS A POWER CORD AND A FUSE TO MAKE THE UNIT OPERATIONAL. THE BEAM IS TEM00, POLORIZED WE WILL COVER EACH UNIT WITH A 12 MONTH UNLIMITED HOUR WARRANTEE, EXCELLENT FOR FOR LAB OR HOME USE. NEW THESE COST APPROX. $350 OUR PRICE $85. DIMENSIONS 9.75 BY 1.25 INCHES, P.S. 4.25 BY 3.25BY 1.25 INCHES. ITEM RAMCNS1: RAMAN CELL OPTICS 308 nm AR/AR 4600 A 0=0 DEGREES 1000 MM FL. 2" DIA. NEW. ORIGINAL PRICE $520 OUR PRICE $175 ITEM TFPOLNS1: POLARIZERS , THIN FILM FOR 532 nm , NEW, ORIGINAL COST $590 EACH OUR PRICE $200 EACH 10 MM DIA. ITEM CO2OCNS1: CO2 HIGH REFECTOR AND OUTPUT COUPLER 10.5 MM DIA, OC =79%R NEW. $200 A SET. ITEM 25MNS1: DIELECTRIC BROADBAND MIRRORS 450 TO 700NM , NEW WITH PLASTIC PROTECTIVE COATINGS , 2 SIZES 25 MM SQ. AND 50 MM SQ. RECOMENDED FOR HIGHER POWER LASERS. 25MM SIZE ITEM 25MNS1 $20 50MM SIZE ITEM 50MNS1 $25 ITEM # BSDNS1: 50/50 DIELECTRIC COATED PLATE BEAM SPLITTER 630 TO 660 NM COMES IN A TRIANGLE SHAPE EACH SIDE APPROX. 1" PRICE $20 ITEM # 45NS1 45 DEGREE RED REFLECTOR , PASSES 488 TO 532NM , CAN BE USED TO COMBINE RED AND GREEN/BLUE LASERS TO CREATE A WHITE LIGHT LASER. 1" SQ. PRICE $15 ITEM# PCINS1 PLANO/CONVEX LENS COATED FOR YAG 1064NM , AR COATED, 10MM DIA. NEW, ORIG. COST $250 OUR PRICE $100 ITEM# INFILTER : INTERFERENCE FILTERS USED FOR PASSING A PARTICULAR SPECTRAL LINE , 11.8 MM DIA. CAREFULLY REMOVED FROM MEDICAL EQUIPMENT AND WRAPPED IN LENSE PAPER. THE FOLLOWING WAVE LENGTHS ARE AVAILABLE. 523.5, 547.4 , 572.1, 512.9, 550.6, 488, 505.7 nm price $20 each. FOR A COMPLETE LINE OF NEW AND USED LASERS - OPTICS -ELECTRO OPTICS- LASER SHOWS ORDER A COMPLETE CATALOG AT MWKINDUSTRIES.COM TO: ORDER GO TO OUR WEB SITE MWKINDUSTRIES.COM {SECURE ORDERING SITE} QUESTIONS OR REMOVAL FROM MAILING LIST EMAIL: MWK(a)WORLDNET.ATT.NET MWK INDUSTRIES 1269 POMONA RD CORONA CA 91720 PHONE 909-278-0563 FAX 909-278-4887

1 0

We will mail 4 U
by 8d47G40gt＠stak1ed.net 25 Nov '97

25 Nov '97

LET US DO YOUR BULK MAILINGS!!! ..$250 PER MILLION THE WAY OF THE FUTURE FOR SUCCESS IN YOUR BUSINESS! Our company will do bulk emailing for your product/service. Addresses are extracted daily by four of our computers, which run 24 hours a day 7 days a week, scanning the net for new addresses. They are fresh! Over 36 million addresses on file. No more than 2 pages (50 lines), no porn and no foul language. We do not do targeted mailings at this price. Targeted mailings $150 per 50,000 addresses extracted. There are no lower prices on the net. Your mailing can be done in a matter of hours. We have 4 computers extracting addresses 24/7. For the fastest service, cheapest prices and cleanest mailings call our processing and new accounts office at 904-282-0945, Monday - Friday 9 - 5 EST. If the line is busy, please keep trying, as bulk mailing is growing fast. We do want to work with you to advertise your product. $250 per million expires December 1, 1997. Price increases to $350 per million, $250 per 500,000. All orders received before December 1 will not reflect the increase. Even with the increase, we will still be the best prices on the net. To have your name removed, call our processing office. Any negative responses will be dealt with accordingly.

1 0

RE: SLD starting with digit (or containing only digits)
by zsako＠banknet.net 10 Oct '97

10 Oct '97

> From woeber(a)cc.univie.ac.at Fri Oct 10 13:51:53 1997 Thanks to all who answered me. I am still confused, because the RFCs seem to be somewhat in contradiction with each other. The RFC1912 says: (Labels were initially restricted in [RFC 1035] to start with a letter, and some older hosts still reportedly have problems with the relaxation in [RFC 1123].) Note there are some Internet hostnames which violate this rule (411.org, 1776.com). On the other hand RFC1123 says: If a dotted-decimal number can be entered without such identifying delimiters, then a full syntactic check must be made, because a segment of a host domain name is now allowed to begin with a digit and could legally be entirely numeric (see Section 6.1.2.4). However, a valid host name can never have the dotted-decimal form #.#.#.#, since at least the highest-level component label will be alphabetic. This is in my view in contradiction with the last sentence quoted by me from RFC1912... [ More than that, RFC2181, which obsolates RFC1123, basically says that the DNS should be able to handle any binary string as a domain name (with the length limitations that apply). However, it emphasizes that the applications may impose restrictions on this... I am curious when will *.com be registered? :)) ] Janos

2 1

RE: SLD starting with digit (or containing only digits)
by Wilfried Woeber, UniVie/ACOnet 10 Oct '97

10 Oct '97

Hi Janos! >I would be grateful if someone could tell me what problems could arise >by permitting domain names starting with a digit, or even containing >*only* digits, under a TLD. You might want to refer to RFC1912: Common DNS Operational and Configuration Errors and pages 2, 3 in particular. Wilfried.

1 0