- ipv6-wg - mailman.ripe.net

Preview of the final RIPE-501bis.
by Jan Zorz ＠ go6.si 10 Apr '12

10 Apr '12

Dear IPv6 WG. After long and exhausting IETF week, where we met with some great experts from the industry and did some sanity checks and corrected some mistakes and misunderstandings in the RIPE-501-replacement document, we are issuing next (9th) version of the draft, that is in our opinion really final one. I mean it. Last one. There was lot's of time, efforts and work put into this document and I think we are done. This replacement document is also meant as a some kind of input or initial template for EU IPv6 profile, so we wanted it to be very solid and accurate. Thanks to all of you involved, you know who you are (you are all in Acknowledgements section ;) ) and thnx to this WG and their co-chairs for support, help and all good comments. We already set the last version to RIPE-NCC for grammar checks and conversion into HTML in order to appear in RIPE Documents section as a draft, but meantime, we are publishing the last version also in PDF in order for you, community, to read it prior to RIPE64 meeting. http://go6.si/docs/Requirements-for-IPv6-in-ICT-equipment-v.9.pdf Please, those of you who are interested and have time, read it and express you r opinions and possible comments. Rumor has it, that we'll have "review" period over the RIPE64 meeting and Last call shortly after that. As this is not an official PDP, we can also propose chairs to change the procedure, if there is any need for that. Track of the progress and different versions of the draft can be found at: http://go6.si/ripe501bis/ Cheers from co-authors: Merike, Sander and Jan

3 3

IPv6 stable privacy addresses
by Fernando Gont 10 Apr '12

10 Apr '12

Folks, We've posted a revision of our IETF Internet-Draft entitled "A method for Generating Stable Privacy-Enhanced Addresses with IPv6 Stateless Address Autoconfiguration (SLAAC)". The document is available at: <http://tools.ietf.org/id/draft-gont-6man-stable-privacy-addresses-01.txt> The abstract of the document is: ---- cut here ---- This document specifies a method for generating IPv6 Interface Identifiers to be used with IPv6 Stateless Address Autoconfiguration (SLAAC), such that addresses configured using this method are stable within each subnet, but the Interface Identifier changes when hosts move from one network to another. The aforementioned method is meant to be an alternative to generating Interface Identifiers based on IEEE identifiers, such that the benefits of stable addresses can be achieved without sacrificing the privacy of users. ---- cut here ---- Interested in IPv6 security? -- Follow us on Twitter: @SI6Networks Interested in discussing IPv6 security topics? -- Join the ipv6hackers@ mailing-list at: <http://www.si6networks.com/community/mailing-lists.html> Thanks! Best regards, -- Fernando Gont SI6 Networks e-mail: fgont(a)si6networks.com PGP Fingerprint: 6666 31C6 D484 63B2 8FB1 E3C4 AE25 0D55 1D4E 7492

1 0

IPv6 SIM cards at RIPE64
by Jan Zorz ＠ go6.si 03 Apr '12

03 Apr '12

Dear IPv6 WG :) For those who are attending RIPE64 meeting in Ljubljana: We just got confirmation from Simobil, one of mobile operators that deployed IPv6 in their mobile network, that they will provide 100 SIM cards for RIPE64 attendees. The cards will be pre-provisioned with IPv6 APN and IPv6 traffic for free. Of course, don't misuse them as they might throttle you if they see any abuse or misuse. For those, who will need also to make phone calls and SMS-es or IPv4 traffic, 5EUR vouchers will be available. Official announcement will go out on a general mailing list, just wante to give you heads-up :) So, fellow IPv6-ers, bring your IPv6 capable devices and enjoy the "IPv6 is in the air" feeling during the RIPE64 meeting in Ljubljana. FYI: Nokia phones works, Android 4 phones usually works, etc... See you in less than two weeks, Jan Zorz, Go6.si

1 0

Re: [ipv6-wg] 2010 IPv4 (and IPv6) Address Use Report
by Silvia Hagen 27 Mar '12

27 Mar '12

Hi Iljitsch Are you updating these for 2011? Thanks Silvia Sunny Connection AG www.sunny.ch +41 (0)44 887 62 10 shagen(a)sunny.ch **************************************************** The new book "Planning for IPv6" has been published with O'Reilly in September 2011. **************************************************** Our website is dual-stack and can be accessed with IPv4 and IPv6 **************************************************** >>> Iljitsch van Beijnum<iljitsch(a)muada.com> 04.01.2011 12:30 >>> [ (Non-cross)posted to NANOG, PPML, RIPE IPv6 wg, Dutch IPv6 TF. ] On the web: IPv4: http://www.bgpexpert.com/addrspace2010.php IPv6: http://www.bgpexpert.com/addrspace-ipv6-2010.php The IPv4 one is included below: 2010 IPv4 Address Use Report As of January 1, 2011, the number of unused IPv4 addresses is 495.66 million. Exactly a year earlier, the number of available addresses was 721.06 million. So we collectively used up 225.4 million addresses in 2010. 35 of the 256 the /8s that make up the IPv4 address space have the status "reserved". 0 and 127 have special meaning and can't be used for normal purposes. 224 - 239 are used for multicast and 240 - 255 are "reserved for future use". With only about two years worth of IPv4 addresses remaining on the shelves, it would seem that that future is here now, but unfortunately, pretty much all operating systems balk at using a "reserved" address. So unreserving those addresses means upgrading EVERY system connected to the Internet. If we're going to do that, we may as well skip those reserved IPv4 addresses and upgrade to IPv6. Last but not least, there's block 10, which is the largest of the three address blocks set aside for private use. The others, 172.16.0.0/12 and 192.168.0.0/16, don't show up as reserved, but are obviously not available for regular use. This makes the total number of usable IPv4 addresses is (256 - 35) * 2^24 - 2^20 - 2^16 = 3706.65 million addresses. The "IANA global pool" consists of 7 /8s (117.44 million) are still unused (unallocated): 39/8, 102/8, 103/8, 104/8, 106/8, 179/8 and 185/8. But there's also a lot of unused space hiding in the "allocated" and "legacy" categories. Each RIR publishes a list of address blocks further delegated to ISPs or end users every day on their FTP servers. If we add up all those blocks, this comes out to 3210.99 million addresses. So the total number of usable-but-unused IPv4 addresses is 3706.65 - 3210.99 = 495.66 million. Going back to the IANA global pool, these are the changes over the past year: Delegated Blocks +/- 2010 to/status AfriNIC 3 +1 APNIC 42 +8 ARIN 35 +4 LACNIC 8 +2 RIPE NCC 34 +4 LEGACY 92 UNALLOCATED 7-19 There is an agreement between IANA and the RIRs that each RIR will get one of the last five /8s. APNIC has been getting two /8s every three months like clockwork in 2010. If this continues, they'll be getting numbers 7 and 6 later this month, and then the final distribution will look like this: Delegated Blocks +/- 2010 to/status AfriNIC 4 APNIC 45 ARIN 36 LACNIC 9 RIPE NCC 35 LEGACY 92 UNALLOCATED - At this point, it becomes very interesting what the status of the legacy space is, exactly. The legacy blocks are each "administered" by one of the RIRs, but does that mean that that RIR is free to further delegate that space to ISPs and end users? There are 146.92 million unused addresses in legacy space, including 16.65 million returned by Interop a few months ago. This is the used versus unused address space administered by each RIR: Legacy Allocated total unused total unused AfriNIC 33.55 24.85 50.33 27.06 APNIC 100.66 22.32 704.64 44.38 ARIN 654.31 60.55 587.20 56.21 LACNIC - - 134.22 37.39 RIPE NCC 67.11 5.77 570.43 67.38 IANA 671.09 16.65 - - AfriNIC used up 8.95 million addresses last year. So their current unused allocated space is good for another three years (if nothing changes) and their final /8 is worth another almost two years. If they get to use their legacy space, that buys them another 2.5 years. So unless IPv4 address use <em>really</em> takes off in Africa, AfriNIC will be handing out addresses for at least three or four years. APNIC is at the opposite end of the spectrum, using up no less than 126.22 million new IPv4 addresses last year. Even if they get to use the legacy space they administer on top of three of the last seven /8s and, it's hard to see how APNIC can avoid having to tell people "no" before the year is out. However, there is a caveat: in the 2010 APNIC records, there is 6.65 million addresses worth of space that isn't in the 2011 records. Part of this is address space returned to APNIC. In other cases, an address block delegated in a previous year expands or shrinks retroactively. Depending on what the underlying reason for these changes is, the actual rate at which APNIC and the other RIRs are giving out address space may be different from what it seems to be at first glance. ARIN, LACNIC, and the RIPE NCC used up 54.55, 17.29, and 75.45 million addresses, respectively, in 2010. However, ARIN saw 27.24 million addresses returned, including the 16.65 million from Interop, which is administered in the ARIN records even though the IANA list doesn't reflect this. For AfriNIC, LACNIC and the RIPE NCC the numbers of addresses that came back were 0.31, 0.22, and 22.62 million, respectively. With respect to running out of addresses, it's important to realize that the Pareto principle (the 80/20 rule) applies: out of the 7686 address blocks given out last year, only 392 (5 percent) were blocks larger than 100,000 addresses, but those were responsible for 82 percent of the address <em>space</em> given out. Even when the RIRs are no longer able to give out those large blocks, they may still be able to fulfill the requests for address blocks smaller than 10,000 addresses. Last year, 6425 such blocks were given out, totaling 14.03 million addresses. It really only takes a single address to be in the content business; it's the ISPs that need a continuous supply of new addresses to connect new customers. So the address shortages looming beyond the summer will hit ISPs and their broadband/mobile customers first and foremost, and the content industry to a much lesser degree. The top 15 IPv4 address holding countries: 2011-01-01 2010-01-01 Increase Country 1 - US 1519.53 M 1495.13 M 1.6% United States 2 - CN 277.64 M 232.45 M 19.4% China 3 - JP 186.82 M 177.15 M 5.5% Japan 4 - EU 151.80 M 149.48 M 1.6% Multi-country in Europe 5 (6) KR 103.50 M 77.77 M 33.1% Korea 6 (5) DE 91.61 M 86.51 M 5.9% Germany 7 (9) GB 82.25 M 74.18 M 10.9% United Kingdom 8 - CA 79.53 M 76.96 M 3.3% Canada 9 - FR 79.29 M 75.54 M 5.0% France 10 - AU 49.10 M 39.77 M 23.5% Australia 11 - BR 40.24 M 33.95 M 18.5% Brazil 12 - IT 37.14 M 33.50 M 10.9% Italy 13 - RU 34.66 M 28.47 M 21.7% Russia 14 - TW 31.93 M 27.10 M 17.8% Taiwan 15 (19) IN 28.70 M 19.42 M 47.8% India Because the US holds so much space, the increase of 25 million addresses seems small, but that's still more than 10% of the address space given out in 2010. China's growth is slowing down a little at 45 million addresses last year compared to 50 million in 2009. But other countries in Asia are picking up the slack and then some: Korea keeps using up large amounts of address space, and India is now also picking up the pace. The US now has 47.3% of the address space in use, down from 50.1% a year ago. The other countries in the top 15 collectively hold 39.7%, up from 38%. That leaves 13% for the rest of the world, up from 12%. Note that I slightly changed the way addresses are counted: previously, all the legacy blocks that didn't have an RIR listed were assumed to be used 100%. But with the return of most of the Interop block this is no longer the case: although ARIN isn't listed as administering the 45/8 block, they actually are and only have 45.0.0.0/15 listed as in use.

2 1

RIPE-501bis: Some additional IPsec comments from Tero Kivinen
by Jan Zorz ＠ go6.si 21 Mar '12

21 Mar '12

Dear IPv6 WG... We received some additional comments from Tero Kivinen. Tero is one of THE experts in IPsec and a long-time implementer. He is part of IETF IPsec wg and a key contributor. As he's not on RIPE IPv6 WG mailinglist, I'm adding him to cc: and at the same time encouraging him to subscribe in order to follow and contribute to the discussion: http://www.ripe.net/mailman/listinfo/ipv6-wg So, his comments are listed below. We would like to "measure the heat" in working group and hear some comments, what you think should be implemented and what not. I explained, that we have certification/testing profiles (NIST, USGv6, IPv6 Ready, etc...) and we have RIPE-501 (soon replaced), that is procurement profile, intended solely as a help to procurement people (usually IPv6-clueless) to order equipment, that makes sense. Tero's comments: -------- In section IPsec: mandatory or optional, I would format the end as following: ---------------------------------------------------------------------- Organizations that use IPsec or expect to use it in the future should include the follwoing in the mandatory section when initiating the tender: * IPsec-v3 [RFC4301, RFC4303, RFC4302] * IKE version 2 (IKEv2) [RFC5996 (obsoletes RFC4306 and RFC4718)] and if support for old IPsec is required add following: * IPsec-v2 [RFC2401, RFC2406, RFC2402] * IKE version 1 (IKEv1, ISAKMP) [RFC2407, RFC2408, RFC2409] ---------------------------------------------------------------------- I.e. prefer IKEv2, and move IKEv1 as separate case. Also note that IKEv1 is tied to IPsec-v2 and IKEv2 is tied to IPsec-v3 and you cannot really mix them that well. Note, also that RFC5996 obsoletged both RFC4306 and RFC4718. This same change should also be done for other places. Also I would rather use IKEv1 than ISAKMP for the old obsoleted key management protocol. ISAKMP is the name of framework on which the IKEv1 protocol is based on (and IKEv2 is also based mostly on the same framework, but everything from that framework document got incorporated to the IKEv2 RFC, so thats why it is not referenced anymore). It seems you do not have IPsec-v2 anywhere, even when you do have IKEv1. What is the reason behind that? IKEv1 works with IPsec-v2, and IPsec-v3 do require IKEv2, so am not sure why IKEv1 is included at all... There are multiple cases where you have "if xxx is requested the equipment must support yyy", where that yyy do require IPsec. Should those be spelled out too. For the Requirements for Mobile Devices the optional support list should probably include RFC4555 IKEv2 Mobility and Multihoming Protocol (MOBIKE), as it is something that is really useful in the mobile nodes. Requirements for Load Balancers: Now the mandatory support has only IKEv1 (ISAKMP), and no IPsec-v2/v3 at all. There isn't really that much that can be done using IKEv1 only. IKEv2 + RFC5685 (Redirect Mechanism for the Internet Key Exchange Protocol Version 2 (IKEv2).) would make some sense even without IPsec-v3, but IKEv1 does not even have any such uses. The optional support list should probably have RFC5685 (Redirect Mechanism for the Internet Key Exchange Protocol Version 2 (IKEv2).) and perhaps RFC6311 (Protocol Support for High Availability of IKEv2/IPsec). The optional list has IKEv1 (ISAKMP) again. ----------- (end of Tero's comments) I think we still are in review phase, so we can implement some changes. I hear that Last Call is planned for after RIPE64 meeting, so we still have time for last changes. As usual, comments and suggestions very warmly welcome. Cheers, Jan Zorz (writing for all co-authors) Go6 Institute Slovenia

3 4

New on RIPE Labs: Growth in IPv6 Capable Infrastructure
by Mirjam Kuehne 19 Mar '12

19 Mar '12

Dear colleagues, Please see this new article on RIPE Labs: "Growth in IPv6 Capable DNS Infrastructure: https://labs.ripe.net/Members/emileaben/growth-in-ipv6-capable-dns-infrastr… Kind regards, Mirjam Kuehne RIPE NCC

1 0

New on RIPE Labs: IPv6 Deployment: Trends and Tidbits of 4, 800 Dual-stack ASes
by Mirjam Kuehne 08 Mar '12

08 Mar '12

Dear colleagues, Please find a new article on RIPE Labs, contributed by Matthew Luckie, Amogh Dhamdhere and Brad Huffaker from CAIDA: "IPv6 Deployment: Trends and Tidbits of 4,800 Dual-stack ASes" https://labs.ripe.net/Members/mirjam/ipv6-deployment-trends-and-tidbits Kind Regards, Mirjam Kuehne RIPE NCC

1 0

New on RIPE Labs: ASes Announcing IPv6 - One Year Later
by Mirjam Kuehne 05 Mar '12

05 Mar '12

Dear colleagues, Please find a new article on RIPE Labs showing the percentage of ASes announcing IPv6: https://labs.ripe.net/Members/mirjam/networks-with-ipv6-one-year-later It is interesting to see what has changed since we presented this graph for the first time about one year ago. Kind regards, Mirjam Kuehne RIPE NCC

1 0

Call for agenda items for RIPE 64 in Ljubljana
by Marco Hogewoning 28 Feb '12

28 Feb '12

Dear colleagues, You guessed it, it is that time of the year again that we get busy to prepare for another RIPE Meeting., the 64th already. This one will take place from 16 till 20 April in Ljubljana, Slovenia. For this meeting we even have arranged for two sessions of the IPv6 Working Group. Both are scheduled on Thursday, starting after the coffee break at 11:00 and continuing after lunch until 15:30. This means we have a total of three hours to fill with topics you think are interesting when it comes to the adoption and deployment of IPv6. So please if you would like to share anything, wether it are thoughts about how to progress IPv6 deployment or showing your latest IPv6 project, please drop us a line at ipv6-wg-chairs (at) ripe (dot) net. Please include a short bio, a synopsis and if available a copy of the (draft) slides you intend to use. Hope to see you all in Ljubljana and of course if you can't make it the sessions will be broadcasted with the option of remote participation. Greetings, The IPv6 WG chairs collective, Marco, David and Shane

1 0

Policy proposal 2011-02: "Removal of Multihomed Requirement for IPv6 PI" Implemented
by Kjell Leknes 22 Feb '12

22 Feb '12

[Apologies for duplicate emails] Dear colleagues, We are pleased to announce that RIPE Policy Proposal 2011-02, "Removal of Multihomed Requirement for IPv6 PI", has been implemented. The RIPE NCC is now ready to accept requests for IPv6 PI assignments without multihoming being a requirement. The full proposal can be found at: http://www.ripe.net/ripe/policies/proposals/2011-02 The revised version of the IPv6 policy was published on 23 January 2012: http://www.ripe.net/ripe/docs/ripe-545 The new request form template for IPv6 PI assignments can be found at: https://www.ripe.net/ripe/docs/ripe-546/ The new supporting notes can be found at: https://www.ripe.net/ripe/docs/ripe-547/ Kind regards --- Kjell Leknes RIPE NCC

1 0