Hi Nick, Apologies for the delayed response. On 15/12/08 18:40 , Wolff, Nick wrote:

Hello all,

Are there any details anywhere on replicating the RIPE RRC setup for local use. Either the old Quagga style or the new exabgp.

We do not have such a document at the moment. There are a few high level descriptions around, the latest one being this RIPE Labs article: https://labs.ripe.net/Members/colin_petrie/updates-to-the-ripe-ncc-routing-i.... However, I suspect that you have seen that already and I understand that you are looking for a more detailed document, more like an implementation guide. As you can see in the above mentioned article, there are many components involved in our setup. The specific combination of these is very particular to our environment. We are planning to share more about the way we operate the RIS system in the coming months. However, it would be very hard, and most likely not generally useful, to give a very detailed how-to for replicating this specific processing pipeline.

Even just articles on setting up quagga MRT logging and storage would be appreciated if any exist.

For guidelines on how to setup quagga MRT logging I would suggest that you have a look at the quagga documentation (e.g. www.nongnu.org/quagga/docs/docs-multi/Dump-BGP-packets-and-table.html). Kind regards, Romeo

/Nick Wolff/

/ /

/Backbone Routing Engineer/

/OARnet 1224 Kinnear Road Columbus, OH 43212 /

/email: nwolff@oar.net <mailto:nwolff@oar.net>/