- ripe-atlas - mailman.ripe.net

Survey results on Atlas open-sourcing
by Richard L. Barnes 05 Jan '12

05 Jan '12

The brief survey I put out a couple weeks ago has gotten 34 responses. The response rate seems to be tailing off, so I've closed the survey. Here's a summary of results. First, the simple things: -- All but one respondent is an Atlas probe host. -- Respondents preferred source to binary release 26:4 (4 abstentions) The responses as to reasons for wanting the Atlas platform opened up are a little more challenging to read. There were four options that respondents, from which respondents could choose as many as they wanted. 0 - I'm not interested in RIPE NCC releasing the Atlas firmware 1 - So that parties other than RIPE to build probes that can feed into the Atlas system 2 - So that I can easily build Atlas-like probes for my own, independent measurement network 3 - So that I can re-use some Atlas features for a non-measurement-related purpose The response patterns, ordered by frequency Pattern Frequency 1 8 2+3 6 0 5 1+2 3 1+2+3 3 2 3 3 1 (who noted: "I don't care too much") Respondents could also fill in an "other" response for their reason. There were two major themes to these responses: -- Security, in the sense both of making the device more secure, and of assuring probe hosts of what the device is doing -- Contributions, i.e., that the community could contribute to probe development One respondent also noted in an "other" response that responses 1 and 2 are not necessarily mutually exclusive; a modified probe could feed both the RIPE system and a private system. Analyze as you will :) --Richard

8 14

Probe location
by Rodolfo kix Garcia 29 Dec '11

29 Dec '11

Hi, what's the method to set the probe location? When I set up my probe, I locate it in the nearest subway station (of course, is not there), but now in the map the probe is too near of my home. The probe location is moved about 300 meters. Are you using other method to locate the probe (IP addresses, Google wifi map,...)? Cheers. kix -- ||// //\\// Rodolfo "kix" Garcia ||\\// //\\ http://www.kix.es/

2 1

Reasons to celebrate - passed 1K active probes :)
by Vesna Manojlovic 28 Dec '11

28 Dec '11

Hi everyone, *you* are part of our big success: more then 1024 probes before the end of this year! We've published an article on Labs about that yesterday: https://labs.ripe.net/Members/becha/ripe-atlas-has-reasons-to-celebrate Thank you very much for participating in this exciting project, and Happy New Year! Vesna

8 19

Happy UDM & Happy New Year :)
by Vesna Manojlovic 23 Dec '11

23 Dec '11

Dear all, One more article on RIPE Labs: about User Defined Measurements: https://labs.ripe.net/Members/becha/happy-beta-testers-of-atlas-udm Thank you for your feedback and contribution! Regards, Vesna

1 0

New measurement target suggestion: 6to4 anycast
by Roman Mamedov 21 Dec '11

21 Dec '11

Hello, I'd like to suggest adding to the list of monitored addresses a new one: 192.88.99.1 - 6to4 anycast IPv4 to IPv6 gateway; https://en.wikipedia.org/wiki/6to4 https://tools.ietf.org/html/rfc3068 This could provide interesting data on what percentage of networks have this address blocked/inaccessible (resulting in broken operation of 6to4), and also what is the average latency to the closest 6to4 gateway across various countries/regions. The next step would possibly be the collection of statistics which ASes 'see' whose 6to4 gateways, this can be inferred from the AS of the traceroute hop that is right before the 192.88.99.1 on the trace. -- With respect, Roman ~~~~~~~~~~~~~~~~~~~~~~~~~~~ "Stallman had a printer, with code he could not see. So he began to tinker, and set the software free."

4 3

Algortithm for probe detecting its offline
by Greg B - NANOG 21 Dec '11

21 Dec '11

Hi, I wanted to ask what is the algorithm / methodology used for a probe detecting / reporting it is offline? I ask, because this morning I intentionally rebooted my cable modem on the network the probe is attached to, which brought my internet down for about 1-2 minutes (I was using the internet immediately after the cable modem re-synched), but the probe is reporting that outage as a 29 minute outage rather than a few minutes. Any comments on why there should be such a large variance from my actual experience versus what the probe saw? -Greg

2 1

New: Atlas resource coverage (and more maps!) beta
by Robert Kisteleki 16 Dec '11

16 Dec '11

Dear Atlas Users, Today we enabled another interesting feature (in beta mode, for now): details about what networks Atlas covers at the moment. This feature lists IPv4/IPv6 prefixes, ASNs and countries. This information will also be used for User Defined Measurements, in order to filter vantage points to specific networks or locations. You can access this at https://atlas.ripe.net/atlas/coverage.html Background information: * the prefixes and ASNs are looked up in RIS, based on the address of the probe * the country code is looked up in OpenStreetMaps based on the probe geolocation We are aware that in some cases the lookup has a surprising result. One example is 6to4: for IPv6 related ASNs the prefix is 2002::/16 but the ASN can be misleading. We'll most likely stop looking up ASNs for 6to4 (and Teredo) prefixes. If you see anomalies *not* related to this, you can let us know at atlas-dev(a)ripe.net Regards, Robert, for the whole team

2 2

Re: [atlas] Email or SMS alert when probe goes offline/online
by Greg B - NANOG 15 Dec '11

15 Dec '11

Hi, I see there was a thread started back on September 7, 2011 with subject: Email or SMS alert when probe goes offline/online this was prior to me joining the mailing list. I'd like to voice my support for a user-configurable amount of time for the Atlas system to send out an email notification that your probe is down (and returned to service). My probe which I run on my home internet connection was apparently down for 3.5 days before I just happened to login to look at the stats. Considering I was at home for much of these 3.5 days, and my Internet connection was working, I assume the probe crashed because simply power-cycling it "fixed" the problem. I know that if I got an email ~15 minutes after the probe was down, my probes downtime would probably have been closer to about 30 minutes rather than 3.5 days. Thanks. -Greg

4 4

problems with (links to) stat.ripe.net
by Wilfried Woeber, UniVie/ACOnet 28 Nov '11

28 Nov '11

Just wanted to double-check... Are you aware of problems - or do others see similar effects - with the display of pages that are linked to from the Atlas panels? IE7 (on XP) complains with "error on page" and Iceweasel on Debian does not complain, but doesn't display any useful information either. As an aside, with Iceweasel the "Result Boxes" rectangle seems to be pinned to a fixed place on the screen and obstructs the information when the page is scrolled underneath. Just wanted to raise a small flag before doing screenshots and other investigations. Thanks for listening, Wilfried.

2 1

no gateway for IPv6
by Wilfried Woeber, UniVie/ACOnet 24 Nov '11

24 Nov '11

Hi folks, just noticed that for an IPv6-capable probe no gateway info/address is given. Curiousity - is there an "good reason" for that behaviour or is it just not implemented yet? Lowest prio, of course :-) Wilfried.

2 1