- ripe-atlas - mailman.ripe.net

[atlas]Geo-location
by Hartmut Richard Glaser 29 Dec '10

29 Dec '10

After the registration of the probes, how can I correct the geo-location? Thanks Hartmut

4 3

[atlas]Geo-location
by Hartmut Richard Glaser 29 Dec '10

29 Dec '10

After the registration of the probes, how can I correct the geo-location? Thanks Hartmut

1 0

[atlas]DHCP behaviour of the probe on startup
by Wilfried Woeber, UniVie/ACOnet 22 Dec '10

22 Dec '10

Hi folks, while debugging some non-probe-related issues here at my ADSL'd net @home, I was told by the provider's techie, that the probe tries to grab *two* addresses at startup. He was monitoring the ARP table in the router, saw a DHCP request and the address assigned by the DHCP Server, and immediately asfterwards, the probe sent a request for an additional address, which was granted by the server. Trying to verify that, I later found out that I can ping the probe only on the second address. [1] Has anyone seen such a behaviour? Unfortunately, I don't have access to the router (cisco 800 series) as it is fully managed by the ISP, and for my other probe we had the IP-Address hard-wired into the DHCP server for the MAC address. Thanks, Wilfried. [1] this is particularly nasty for home networks with a very small number of addresses available (a bock of 8 in may case) and a long timeout...

2 1

[atlas]how big is the limitation imposed by the req. for DHCPv4?
by Wilfried Woeber, UniVie/ACOnet 22 Dec '10

22 Dec '10

Folks, I'd like to collect input from those interested in principle to deploy groups of probes within their operational environment(s), regarding the requirement to have DHCPv4 available in order to configure the probe (for IPv4). I already came up with a coupe of locations and environments, where such a cute thing would be nice to have, but in most (if not all) of these places, there is no DHCP available (and for good reasons). As an aside to the developers, would it be feasable to connect the probe in network A, configure it for the destination network and then move it over to network B for its happy life? Cheers, Wilfried.

2 1

[atlas]Probe flapping
by Harald Firing Karlsen 21 Dec '10

21 Dec '10

Hi, My RIPE Atlas probe (MAC: 00204AC8243A) started flapping last night and is continuing to flap. It have flapped about 90 times since midnight, do you have any known problems at the moment? -- Kind regards Harald Firing Karlsen

10 17

[atlas]Question about security?
by Marco Davids (SIDN) 17 Dec '10

17 Dec '10

Hi, So how does security on the Atlas portal work? Reason for asking is that I changed the password from home yesterday, but when i logged in from work this morning, i was not asked for the new password. Maybe some kind of sessionid cookie with a long expiry time? Is that safe enough? Regards, -- Marco

2 1

[atlas]RFC5006
by Marco Davids (SIDN) 13 Dec '10

13 Dec '10

Question: Do the Atlas probes support RFC5006 (RDNSS option)? If not, would that be an idea to implement? Regards, -- Marco

3 2

[atlas]Moving a probe
by Richard L. Barnes 13 Dec '10

13 Dec '10

Hey guys, I have had a probe move from Columbia, Maryland, USA to Cambridge, Massachusetts, USA. How do I update the registered location? --Richard

2 1

[atlas]Upgrades today
by Robert Kisteleki 11 Dec '10

11 Dec '10

Hi, Today we'll upgrade some of the central components of the system, including the UI. Please don't be surprised about service interruptions. Regards, Robert

6 10

[atlas]option ntp-servers ?
by Marco Davids (SIDN) 09 Dec '10

09 Dec '10

Hi, Question: does the Atlas-probe obey to the 'option ntp-servers' DHCP option? If not, mine could be into trouble, since I don't allow outbound NTP-requests. (Sorry if this has been asked before, I am new to this list and haven't found the archive just yet) Regards, -- Marco

2 1