- ripe-atlas - mailman.ripe.net

Port blocking statistics
by Bartsch, Rene 25 Jul '12

25 Jul '12

Hi, when charting the internet it would be useful to have an oversight about ISPs blocking ports. Especially discussions about network neutrality should be based on hard facts instead of polemic discussions. So I suggest to check the connectivity of the protocols listed in http://www.iana.org/assignments/service-names-port-numbers/service-names-po… once a week as built-in measurement. Best regards, Renne -- Sent with love from the new tine 2.0 email client ... Please visit http://tine20.org

3 3

128.0.0.1 and 128.0.24.1 measurements
by Tuomo Soini 24 Jul '12

24 Jul '12

Should these measurements be discontinued? These networks are no more visible. http://www.ris.ripe.net/dashboard/128.0.24.0/24 http://www.ris.ripe.net/dashboard/128.0.0.0/21 -- Tuomo Soini <tis(a)foobar.fi> Foobar Linux services +358 40 5240030 Foobar Oy <http://foobar.fi/>

2 1

Probe down?
by Yoann Gini 23 Jul '12

23 Jul '12

Hello, My probe is down since a while now. I’ve try to unplug and replug many time, change USB and ethernet slot and it’s still down. The green led is on and the orange is slowly flashing, my swith see the probe, bit Atlas always report it as down. I’ve the Probe ID 2199. What I’m supposed to do ? Best regards, Yoann Gini.

5 5

Fwd: [ipv6-wg] New on RIPE Labs: Test your IPv6 Reachability by Using RIPE Atlas (now visualised)
by kix 23 Jul '12

23 Jul '12

fyi. I think this mail was not sent to this mail list. Cheers, kix -------- Mensaje original -------- Asunto: [ipv6-wg] New on RIPE Labs: Test your IPv6 Reachability by Using RIPE Atlas (now visualised) Fecha: 17/07/2012 14:32 Remitente: Mirjam Kuehne <mir(a)ripe.net> Destinatario: ipv6-wg(a)ripe.net [apologies for duplicate mails] Dear colleagues, As announced in earlier, it is possible for RIPE NCC members to do IPv6-traceroutes from all RIPE Atlas probes to IPv6 destinations. In this new article on RIPE Labs we present a first experimental analysis and a prototype visualisation of the traceroute results: https://labs.ripe.net/Members/emileaben/visualise-your-ipv6-connectivity-us… Kind Regards, Mirjam Kuehne RIPE NCC -- Rodolfo García Peñas (kix) http://www.kix.es

7 7

Concurrent traceroute issues on the probes
by David Lebrun 23 Jul '12

23 Jul '12

Hi all, I was wondering whether the probes can perform multiple concurrent traceroutes toward different destinations, and if so, are they able to differentiate the replies ? I just ran into this problem with paris-traceroute, the path were completely mixed up and stderr output looking like the following messages multiple times (IP addresses redacted): [WARN](TracertImpl.cc, 368)A reply received with bad original destination address A.B.C.D, should be W.X.Y.Z [WARN](TracertImpl.cc, 326)Bad return flow id 0x4d2 from E.F.G.H [WARN](TracertImpl.cc, 331)ICMP reserved words 0 0 0 0 0 As the probes use paris-traceroute, I prefer to be sure that the results are not flawed. David

2 4

Embedd built-in measurement page into website
by Bartsch, Rene 23 Jul '12

23 Jul '12

Hi, is there any way to embedd the "Built-in Measurements"-JQuery-Frame of my probes into a publically accessible website? Thanx for any hint, Renne -- Sent with love from the new tine 2.0 email client ... Please visit http://tine20.org

2 1

High inbound traffic causing packet loss?
by Tibor Djurica Potpara 23 Jul '12

23 Jul '12

Hello! I have just received an Atlas probe and I have been observing some weird readouts on the Atlas portal. Especially, occasional packet loss and considerable jitter, even to first and second hop destinations. I am surprised because even though I am a home user, I have a very stable connection (FTTH, 100/10 Mbps) and I've never experienced such connectivity issues. I've attached the probe directly to the ISP-provided switch that doesn't do IGMP snooping and since IP multicast is used for IPTV, high traffic (up to 50 Mbps) is occasionally flooded to all the switch ports. Taking into account that the probe is underpowered in terms of CPU, is it possible that it cannot handle such traffic and thus reports packet loss? If such is the case, I will move the probe behind a router to filter the multicast streams out. Best regards, Tibor Djurica Potpara

2 1

Flood-ping to measure packet loss?
by Bartsch, Rene 18 Jul '12

18 Jul '12

Hi, I've just started hosting a probe and I'm new to the list, so a "Hello" to all! :) Does the probe send simple pings or does it send flood pings (e.g. ping -f -c 1000 <destination>) for detection of packet loss? Best regards, Renne -- Sent with love from the new tine 2.0 email client ... Please visit http://tine20.org

3 3

Firmware 4470 to be released soon
by Ann Barcomb 11 Jul '12

11 Jul '12

Hello, Probe firmware version 4470 will be released soon. This version includes a small data structure change from 4460 which only affects DNS measurements: the addition of the optional field 'src_addr'. We have also published a correction for version 4460, which mistakenly listed a field 'src' for DNS measurements. This field does not exist in 4460. http://weir-dev.atlas.ripe.net/doc/data_struct#v4460_dns Kind Regards, Ann -- Ann Barcomb RIPE NCC Community Builder http://www.ripe.net Measurements Community Building +31 20 535 4444

2 1

Atlas infrastructure issues on Friday, 2012-06-29
by Robert Kisteleki 03 Jul '12

03 Jul '12

Dear Atlas users, As part of regular maintenance, last Thursday (2012-06-28) afternoon we upgraded the OS on a subset of our controlling infrastructure. During this work, some Atlas probes were told to hold back result reporting. A consequence of this was that when reconnecting, these probes sent in way more (and bigger) results than usual. Unfortunately, not all of the upgraded components ("controllers") had enough disk space to deal with the sudden increased data inflow. The combination of these events means that part of our infrastructure could not buffer results submitted from the probes, and as a result these results have been discarded. The event lasted approximately between 22h Thursday and 05h Friday (UTC), and affected about 30% of the probes. These probes will have a gap in their downloadable data sets and on their graphs. Since the event we increased the capacity of the involved infrastructure components. This will help us avoiding the same event occurring again. We apologise for the inconvenience this may cause. Regards, Robert Kisteleki RIPE NCC R&D

1 0

probe resolution, overhead, or ...?
by Randy Bush 20 Jun '12

20 Jun '12

we want to use atlas probes in an experiment. being prudent (you can tell it was not i), we decided to try to get some basic calibration. one run was just on a local LAN. three hosts on the same gige switch o probe 2285 o psg.com, a not very fancy or fast freebsd 9 box with intel/pro1000 gige ports o bbgp.psg.com, a funky older freebsd 9 box with bge gige probe 2285 pinging bbgp.psg.com, average RTT: 1.5606994382 [0], number of pings: 356*3 psg.com pinging bbgp.psg.com, average RTT: 0.253424332344 [0], number of pings: 674 has anyone done similar probe calibration experiments? does anyone have any clue as to why the difference? randy [0] - my favorite precision joke A gentleman accosts a guard in the museum and asks, "How old is that mummy?" The guard responds, "I believe it is 2005 years old." The gentleman asks "Why that particular age, 2005?" The guard responds "Well, I was told it was 2000 years old when I started work here five years ago."

4 7

Changes to RIPE Atlas raw data structures
by Ann Barcomb 20 Jun '12

20 Jun '12

Hi, We are planning on updating RIPE Atlas probe firmware, which will lead to some changes in the raw data structures. An article about this has been posted on Labs: https://labs.ripe.net/Members/emileaben/ripe-atlas-data-structure-changes We don't plan to announce these changes to this list in the future, because this list is for a more general audience and this information may not be of general interest. Instead, we have created an RSS feed for these types of announcements: https://atlas.ripe.net/atlas/feed/ Kind Regards, Ann -- Ann Barcomb RIPE NCC Community Builder http://www.ripe.net Measurements Community Building +31 20 535 4444

7 8

Feature-suggestion: "round-robin" probes
by Alexander Mayrhofer 11 Jun '12

11 Jun '12

Hello, i'm figuring how RIPE atlas could be most useful for assisting in monitoring our Ancast Network, and came up with the following idea: The Atlas network has a big advantage over other monitoring /measurement networks, which is obviously its sheer size (and topological diversity). Rather than using the Atlas network for pure performance measurements, i would love to be able to use Atlas for reachability measurements (and understand which Anycast location attracts traffic from which region, and how this changes over time). These reachability / topology discovery measurements do not need to be nearly as frequent as the performance measurements, but should utilize all available probes. So, instead of being able to use 10 probes to run a continous performance test (say, DNS query every 300 seconds), i would rather like to be able to use a very high number of probes (best case: "all"), but have each of the probe eg. perform just one traceroute per day (or, even once per week would be enough). This would give me an excellent overview about the topology, but is not possible using the current limits of the UDMs. However, instead of allowing users to allocate measurements to a much higher number of probes, this functionality would also be possible be adding some "probe round-robin" feature to the control infrastructure, for example "randomly allocate a new set of probes every xx seconds". If that feature would exist, i could implement the above reachability test with the following parameters: Test: traceroute Number of probes: 10 Measurement interval: 3600 Swap probe-set interval: 10800 (NEW feature) (which would re-allocate new probes every 3 hours, theoretically working through all 1500 probes about every month?). An obvious alternative would be functionality where i could "queue" "single-shot" measurements for the whole network (since chances are low i would get every probe if they are randomly assigned). comments? Suggestions? Alternatives? Alex Mayrhofer Head of R&D nic.at

5 13

Cannot ping 128.0.0.1, 128.0.24.1
by ckeck＠texoma.net 31 May '12

31 May '12

Cheers! Looked at my stats, and it looks as if not only my probe can't ping 128.0.0.1 and 128.0.24.1. The probe is hooked up to a router on a Verizon FIOS (fiberoptic) line. To see if that's a systemic issue, I pinged the same addresses from systems at work, as well as TMobile's (U.S.) wireless broadband, and they respond just fine. Question now is, where is the problem at? THX! -Cornelius -- Cornelius Keck -----------------------------------------> ckeck(a)texoma.net Beware, so long as you live, of judging men by their outward appearance. Jean de La Fontaine

4 4

v6 support
by Randy Bush 29 May '12

29 May '12

i am not understanding why probe 2285 does not seem to even get an ipv6 address on the in-rack lan, while a whole lot of other devices do. and 2283 managed to get a v6 address but no gateway, and of course no v6dns. what do the little puppies want, nd ra ??? randy

4 8

Ping to labs.ripe.net
by Dan Luedtke 16 May '12

16 May '12

Hi probe-admins, I see this on all my probes, do you have the same problem? Ping (IPv4) labs.ripe.net 193.0.6.153 100% packet loss regards Dan -- Dan Luedtke http://www.danrl.de

3 2

baccouche2@yahoo.com t'invite à rejoindre Twoo
by Thomas via Twoo 10 May '12

10 May '12

Je viens de découvrir un nouvel outil pour rencontrer du monde en ligne : Twoo.com. ---------------------------------------------------------------- Hi, ripe-atlas Thomas vient de trouver un nouvel outil pour rencontrer du monde en ligne et aimerait que tu te joignes à la fête : Twoo.com Copie/colle le lien ci-dessous dans ton navigateur : http://twoo.com/m/39jVbXL_ Tu ne veux plus recevoir ces mails? Clique sur ce lien: /unsubscribe/?email=ripe-atlas%40ripe.net&code=37d33a52e2b420b3962ae52bae8ce1cb&typeid=2---------------------------------------------------------------- TWOO NV/SA, UBIDOCA Center 3145, 105 Route Pommiers, F-74370 Bellevue, France info-fr(a)twoo.com BE0834322338.

1 0

Credit Consumption
by Jens Weibler 09 May '12

09 May '12

Hi, I just noticed that I can't create new measurements anymore: "Your current daily credit consumption (62496) is higher than you allowed (15000)." But I've got enough credits on my balance and I don't want to stop my measurements. Why can't I just change the probe count or the measurement interval? ;) -- Jens Weibler IT-Services Hochschule Darmstadt www.h-da.de University of Applied Sciences Fachbereich Informatik www.fbi.h-da.de Schöfferstr. 8b D-64295 Darmstadt Tel +49 6151 16-8425 Fax +49 6151 16-8935 jens.weibler(a)h-da.de

2 2

New on RIPE Labs: Test your IPv6 Reachability by Using RIPE Atlas
by Ann Barcomb 09 May '12

09 May '12

[apologies for duplicate mails] Dear colleagues, RIPE Atlas can now be used to test your IPv6 reachability, even if you do not host a RIPE Atlas probe - provided you are a RIPE NCC member. More details can be found on RIPE Labs: https://labs.ripe.net/Members/becha/test-your-ipv6-reachability-using-ripe-… If you have any comments or questions, please let us know. Kind Regards, Ann Barcomb

1 0

Routing glitch between BSNL and F Root
by Anurag Bhatia 26 Apr '12

26 Apr '12

Hello, There has been some routing glitch in the F root server instance running in Chennai, India by niXi AS 24049. Govt. owned BSNL AS9829 routers are not hearing any BGP announcements and thus F root does not works at all on BSNL. anurag@laptop ~ $ traceroute f.root-servers.net -A traceroute to f.root-servers.net (192.5.5.241), 30 hops max, 60 byte packets 1 192.168.1.1 (192.168.1.1) [AS8151/AS28513] 1.552 ms 2.040 ms * 2 117.207.48.1 (117.207.48.1) [AS9829] 26.010 ms 28.433 ms 31.136 ms 3 218.248.173.42 (218.248.173.42) [AS9829] 34.497 ms 35.968 ms 38.372 ms 4 218.248.250.86 (218.248.250.86) [AS9829] 91.784 ms 94.430 ms 96.794 ms 5 * * * 6 * * * 7 * * * 8 * * * I have been hosting RIPE Probe #1032 and here is F Root connectivity data from proble: [image: Inline image 1] As we can see root server is not accessible at all from Jan and even in Nov, Dec last year it was available with over 300ms latency which indicates network was not using Chennai anycast node since latency between this test probe placed in Haryana (North India) and Chennai (South India) should be around 70ms. Thanks. -- Anurag Bhatia anuragbhatia.com or simply - http://[2001:470:26:78f::5] if you are on IPv6 connected network! Twitter: @anurag_bhatia <https://twitter.com/#!/anurag_bhatia> Linkedin: http://linkedin.anuragbhatia.com -- This message has been scanned by Kaspersky Anti-Virus. For more information about data security please visit http://www.kaspersky.com and http://www.viruslist.com

3 4

Request for RIPE Atlas probe DHCP change.
by Leo Bicknell 23 Apr '12

23 Apr '12

Could the RIPE Atlas probe DHCP client please be configured to send a ClientID, perhaps "RIPEAtlasProbe"? Many home gateways show a list of DHCP clients and list the client ID. It would make it much easier to identify which device is which using these tools. -- Leo Bicknell - bicknell(a)ufp.org - CCIE 3440 PGP keys at http://www.ufp.org/~bicknell/

4 5

ATLAS as mechanism for route policy discovery
by Alexander Asimov 23 Apr '12

23 Apr '12

Hello. During last decade much attention was paid to topology discovery at inter-domain routing level. But most of these projects are only targeted on physical links discovery; at the same time there was little opportunity to check the real use of links by single AS. The knowledge of Autonomous System relationships from single AS view could be used in many cases. For example it could be used during designing AS or for traffic flow engineering purposes. In case to solve this problem we have invented several active probing algorithms for discovering real routing policy map from single AS view. One of them is based on using spoofed source IP. We send an echo request with record route option and source IP from our address space and as the result we can see the part of reverse trace from destination. This helps to understand which links are used by our AS. It is a kind of snapshot. This information is used in iteration process and the all data results in model of AS relationships which could be reversed to single view for every AS. At the current moment we cover with help of our nodes about 40% of transit AS, but with help of RIPE Atlas we will be able to cover more than 90%, and give back to community a tool for traffic flow prediction at interdomain routing level. Spoofing is obviously bad in most of cases, but not this time. We need opportunity to strictly spoof only one IP from our address space. The list technical requirements of our proposal: 1. 178.248.239.238 always will be used as spoofed address; 2. There will be about 15 experiments every day; 3. Each experiment will last not more than 10 minutes; 4. The total approximate packet generation activity from all nodes will be about 500 packets per second; 5. We need opportunity to have different measurement plans (list of destinations) on different nodes. We work with Planet Lab nodes in the same way: every day there is a new .gz archive with list of targets for all nodes, every node unpacks it and use then only a sublist of destinations, but the packet generation script is same on all nodes. We're open to discussion on procedures described above. Best regards, Alexader Asimov

1 0

Measure DNS resolve times
by Daniel AJ Sokolov 10 Apr '12

10 Apr '12

Hello, My ISP has changed something and as a result DNS lookups have slowed down considerably. How would I set up a User Defined Measurements to perform certain lookups on a nameserver and measure the response times? Thank you Daniel AJ -- Follow me on twitter @newstik http://twitter.com/newstik

3 2

RIPE Atlas User-Defined Measurements Are Here!
by Ann Barcomb 04 Apr '12

04 Apr '12

Dear Atlas Hosts and Sponsors, We are pleased to announce our first roll-out of user-defined measurements (UDM) for RIPE Atlas. As of today, all hosts and sponsors on this mailing list are invited to run custom measurements. Over the coming weeks we will continue to roll out UDM to a wider audience. To access UDM, either click on the link at the top right when you are logged in to the RIPE Atlas website, or go directly to: https://atlas.ripe.net/atlas/udm.html For the time being, we have created a fairly low rate limit, which we expect to increase over time. More information about limits and other aspects of the UDM system can be found in the documentation: https://atlas.ripe.net/doc/udm Discussion and questions about UDM can be directed to this mailing list (ripe-atlas(a)ripe.net) or to atlas-dev(a)ripe.net. You may also be interested in joining us at the UDM "Birds of a Feather" (BoF) session at RIPE 64 in Ljubljana, on Thursday, 19 April after the Measurements, Analysis and Tools (MAT) Working Group session. https://ripe64.ripe.net/programme/meeting-plan/bof/ Happy measuring! - The RIPE Atlas team

9 18

labs.ripe.net dead?
by damkol＠gmail.com 04 Apr '12

04 Apr '12

Hello. 29.03.2012 labs.ripe.net stopped respond to icmp. https://zpm02.atlas.ripe.net/atlas/rrd.png?prb_id=741&msm_id=1007&type=week… >From other places with other internet connections also not respond to icmp. -- damkol(a)gmail.com

3 2