- ripe-atlas - mailman.ripe.net

Probe not coming online anymore after firmware upgrade
by Annika Wickert 25 Mar '19

25 Mar '19

Hi everyone, I bought a new USB Stick for this probe as the old one was tagged as readonly etc.. https://atlas.ripe.net/probes/23913/ <https://atlas.ripe.net/probes/23913/> In the panel it says: 2019-03-21 14:50:02 UTC Probe firmware upgraded Your probe #23913 <https://atlas.ripe.net/probes/23913/> upgraded its firmware from version 3.3.8 to version 4960 But for some reason it is not coming online at all :(. Any idea what could be the issue? I also see no network traffic at all originating from the probe. Best, Annika

5 5

Fwd: credit request
by Michael Rabinovich 22 Mar '19

22 Mar '19

(I previously subscribed to this list using the same mail alias as used for my RIPE Atlas account, and the mail below was held up for moderation since it came from a non-matching email address. I now changed my subscription and am re-sending that email. I apologize in advance if the moderator releases the original mail and you see a duplicate. — Michael) > Begin forwarded message: > > From: Michael Rabinovich <michael.rabinovich(a)case.edu> > Subject: credit request > Date: March 21, 2019 at 2:45:45 PM EDT > To: ripe-atlas(a)ripe.net > > Folks, > > I teach computer science at Case Western Reserve University. I have a group of students working on a research project to characterize certain aspects of DNS and HTTP interactions on the Web. To get a representative measurement, we need to resolve hostnames from top-1M websites from a large number of widely dispersed probes. So we need a large amount of credits and I was wondering if I could ask folks for help. My back of the envelop calculations suggest we are short of ~200M credits. I realize it’s a large amount, but we would take any help we can get and will conduct as credible measurement as we can with the credits we assemble! Please note that my RIPE Atlas account is associated with mail alias misha(a)case.edu <mailto:misha@case.edu> (not the default email address I am sending from), so please use “misha(a)case.edu <mailto:misha@case.edu>” for credit transfer if you can help. > > Many thanks in advance! > Regards, > Michael Rabinovich > > >

4 4

Request RIPE Atlas Credit for Research
by 陆超逸 07 Mar '19

07 Mar '19

Dear all, Greetings! I'm a PhD student at Tsinghua University, China. Recently a large-scale measurement via RIPE Atlas is needed for my research. However, as a new user I don't have any credit to proceed, and unfortunately the time doesn't allow me to earn them by myself. So I'm here to ask for help. Is it possible for anyone generous enough to offer me some RIPE Atlas credits (like, a million)? My account at RIPE NCC is lcy17(a)mails.tsinghua.edu.cn. Many thanks for your help! Sincerely, Chaoyi Lu

26 27

Re: [atlas] ripe-atlas Digest, Vol 91, Issue 4
by Markus heptner 06 Mar '19

06 Mar '19

500.000 sent :) Markus

1 0

Graphing packet loss
by Steve Hill 01 Mar '19

01 Mar '19

I've got some ping measurements set up and am trying to find a good way to visualise outages. The Latencymon tool obviously shows red shaded sections on the graphs for an outage, but they vanish when zoomed out a long way. A graph of average packet loss seems the obvious way of doing it, but it doesn't look like there's any way to get this from the Atlas website, sort of downloading the data and building my own tool to analyse it. Am I missing something obvious? :) -- - Steve

1 0

New RIPE Atlas Version 4 Probes
by Mirjam Kuehne 26 Feb '19

26 Feb '19

Dear colleagues, In part as a response to recent questions regarding the distribution of RIPE Atlas probes, we have prepared an article detailing the work we have been doing to get supply back on track: https://labs.ripe.net/Members/alun_davies/new-ripe-atlas-version-4-probes We hope that this article, in which we introduce the new generation of RIPE Atlas probes, will answer at least some of the questions that have arisen lately. We’d like to thank you all once again for your patience! Kind regards, Mirjam Kühne RIPE NCC

1 0

Time difference between results and update of measurement status
by Vasileios Giotsas 25 Feb '19

25 Feb '19

I've seen that the status of a measurement is updated much later than when the measurement results become available. For instance, while the RTTs of a ping measurement are returned the status is still Ongoing for up to 3 minutes. Is there anything (such as sanity checks) that intervenes between the update of the results and and update of the measurement status, which may change the results? Or is it safe to assume that once the results are out the measurement status will eventually change to 'Stopped', just a bit later? Thanks! Vasileios

2 1

Issue with RIPE Atlas HTTP measurements
by Philip Homburg 19 Feb '19

19 Feb '19

We recently discovered an issue with RIPE Atlas HTTP measurements. In trying to fix an issue that caused the HTTP body size to be reported incorrectly, we inadvertently introduced a bug that prevents the measurement from working under certain conditions. This bug affects firmware release 4940 and the upcoming releases 4950 and 4960. The combination that fails is a recurring measurement after the first run with an HTTP server that returns the body as chunks. This means that one-off measurements are fine. Unfortunately, HTTP measurements that are part of anchoring measurements are affected. We will work to fix this issue in the first firmware release after 4960, which can be expected in the next couple of months. We apologise for the ongoing issue and will keep you informed as we work to resolve it. Philip

1 0

Re: [atlas] "Cannot resolve" tag on IPv6-only network?
by ripe＠brite.cz 14 Feb '19

14 Feb '19

https://atlas.ripe.net/about/faq/#i-have-an-ipv6-only-network-will-the-prob… says I have an IPv6-only network. Will the probe work on it? Yes. All probes can be configured statically with an IPv6 address, default router, DNS resolvers, etc. through the web UI. In addition, version 3 probes can be fully configured through router advertisements (support for RFC 6106 was added in firmware release 4680). There is at the moment no support for DHCPv6 (RFC 3315). Version 1 and 2 probes can obtain addresses and default routers through router advertisements, but cannot obtain DNS resolvers that way. For those probes, the DNS resolvers will have to be configured statically through the web UI. ______________________________________________________________ > Od: "Lorenzo Colitti" <lorenzo(a)google.com> > Komu: "Anand Buddhdev" <anandb(a)ripe.net> > Datum: 14.02.2019 12:47 > Předmět: Re: [atlas] "Cannot resolve" tag on IPv6-only network? > > CC: <ripe-atlas(a)ripe.net> >On Sat, Feb 9, 2019 at 7:47 PM Lorenzo Colitti <lorenzo(a)google.com> wrote: > >> IPv6-only networks are certainly supported, but if the probe isn't aware >>> of any DNS resolver, then it's not going to be able to do any of its own >>> DNS lookups, and that's why it's been tagged with the "cannot resolve" >>> tags. >>> >> >> Hmm. The network announces IPv6 DNS servers via RDNSS, and as far as I >> know, they work. Does the probe support RDNSS? >> > >I turned on IPv4 on that subnet and things started working again. That >makes me think that the probe doesn't support RDNSS. Can anyone confirm or >deny? Should I file a bug? > >

2 1

"Cannot resolve" tag on IPv6-only network?
by Lorenzo Colitti 14 Feb '19

14 Feb '19

My probe v1 is on an IPv6-only network with NAT64 and DNS64. In the web UI I see it's tagged with "cannot resolve A" and "cannot resolve AAAA". Are IPv6-only networks supported? Is this because the network doesn't have a DHCP server? Something else?

2 3