- ripe-atlas - mailman.ripe.net

v3 probe has gone offline and can't be revived
by Peter Gutmann 21 Dec '21

21 Dec '21

My v3 probe took itself offline earlier today and attempts to get it back online again haven't worked, after booting it settles into a state where there's no ethernet connection to the router it's attached to, the Power LED is on (obviously), Internet is off, WiFi is blinking slowly, Ethernet is blinking quickly, and WPS is on. Trying to factory reset it has no effect. Does anyone have any ideas on where to go from here?

1 1

swapping a v1 for a v3
by Randy Bush 14 Dec '21

14 Dec '21

a sweet old v1 probe, 2285, in a hard to access (due to covid) place died 19 months ago. i want to swap in a v3, 25898, this weekend. i know i could create a new entry, but how do i delete the old; or better yet, move the data from old to new? stop laughing. :) randy

7 11

RIPE Atlas VM Anchors IPv6 only support?
by Chriztoffer Hansen 13 Dec '21

13 Dec '21

Hello, On Thu, 8 Nov 2018 at 15:35, Alun Davies <adavies(a)ripe.net> wrote: > We just this morning published an article announcing that, as of today, we are accepting applications for anyone interested in hosting RIPE Atlas VM anchors. The article points you to all the information you’ll need to apply for and install a virtual anchor: > > https://labs.ripe.net/Members/alun_davies/announcing-ripe-atlas-vm-anchors I was reading through the list of requirements for hosting RIPE Atlas VM Anchors as of Nov 2021. • https://atlas.ripe.net/docs/anchor-installation-vm/ • https://atlas.ripe.net/legal/anchors/memorandum/ > Network-wise, RIPE Atlas VM anchors have the following requirements: > • The anchor must have native IPv4 and IPv6 (if IPv6 is announced in the host ASN) > • Static IPv4 and IPv6 addresses need to be unfiltered (not firewalled) > • The VM anchor may require up to 10 Mbit bandwidth (it currently requires much less) >From the requirements, I glean if a network is not able to provide an unfiltered/non-firewalled IPv6 address to the VM. IPv6 is not a requirement if not used within the applying host ASN. Only an unfiltered public IPv4 address is. What about the reverse situation? ↪ I.e. the host ASN applying for hosting a VM Anchor is an IPv6-only ASN. Not utilizing IPv4 in the ASN. Therefore not able to provide an unfiltered IPv4 address to the VM? To my current understanding, the latter example is an instant disqualification if applying for hosting a RIPE Atlas VM Anchor? /Chriztoffer

2 3

Inconsistencies in anchor API and measurements
by Malte Appel 18 Nov '21

18 Nov '21

Hi everyone, sorry in advance for the long mail. tl;dr: Anchor API and UI give inconsistent results. Some anchor mesh measurements could be fixed, some might target non-anchors. Not sure what to do about it. I am currently working a lot with RIPE Atlas and recently wanted to use the anchors and their mesh measurements in particular. I wanted to answer two simple queries: 1. Get a list of all active anchors 2. Get a list of all active anchor mesh and probe measurements (traceroute, for my particular use case) However, while trying to answer these queries, I stumbled upon quite some inconsistencies, depending on which interface / API is used. As far as I can tell there are four ways in which one could technically answer query 1: 1. Look at the website: https://atlas.ripe.net/anchors/list/ -> 840 results 2. Query the /anchors API with attribute is_disabled = false: https://atlas.ripe.net/api/v2/anchors/?is_disabled=false -> 844 results 3. Query the /probes API with attributes is_anchor = true and status = 1 (Connected): https://atlas.ripe.net/api/v2/probes/?is_anchor=True&status=1 -> 729 results 4. Query the /probes API with attributes tags = system-anchor and status = 1 (Connected): https://atlas.ripe.net/api/v2/probes/?tags=system-anchor&status=1 -> 729 results Methods 3 and 4 are actually consistent! The main discrepancy is between the /anchors and /probes API: 116 anchors that are listed on the webpage and/or /anchors API as ‘active’ are inactive (97 abandoned; 19 disconnected at time of writing) according to their respective /probes entry. I understand that disconnects might be temporary, but some anchors seem to be inactive for years (at least according to their status) and are still listed as active. I have attached a text file with some notes that go deeper into the differences, but might be hard to read. For query 2, I faced a similar situation: 1. Look at the website: https://atlas.ripe.net/anchors/list/full/ Anchoring Mesh IPv4: 840 Anchoring Mesh IPv6: 739 Anchoring Probes IPv4: 840 Anchoring Probes IPv6: 705 Total: 3124 2. Query the /anchor-measurements API Anchoring Mesh IPv4: 849 Anchoring Mesh IPv6: 743 Anchoring Probes IPv4: 902 Anchoring Probes IPv6: 753 Total: 3247 3. Query the /measurements API with attributes status = 2 (Ongoing), type = traceroute and corresponding attributes: Anchoring Mesh IPv4: af = 4; tags=anchoring,mesh Anchoring Mesh IPv6: af = 6; tags=anchoring,mesh Anchoring Probes IPv4: af = 4; tags=anchoring,probes Anchoring Probes IPv6: af = 6; tags=anchoring,probes For example: https://atlas.ripe.net/api/v2/measurements/?status=2&type=traceroute&af=6&t… Anchoring Mesh IPv4: 1026 Anchoring Mesh IPv6: 902 Anchoring Probes IPv4: 668 Anchoring Probes IPv6: 619 Total: 3215 These results are even more mixed: - Tags can be inconsistent: Some measurements have none, some have the ‘probes’ or ’mesh’ tag, but miss the ’anchoring’ tag. - Some anchors have multiple measurements (especially probes measurements), of which most actually are run by the same set of probes, i.e., they are duplicates. - Which measurements are contained in which of the three result sets is very mixed, maybe I should draw a Venn diagram :) Finally, I looked at the consistency of the IP addresses of the /anchors API (ip_v4 and ip_v6), the /probes API (address_v4, address_v6), the DNS result for the FQDN of the anchors, and the target IP of the mesh/probes measurements. I noticed some problems, since our lab (IIJ) also operates an anchor (probe 6425 [0]) and we updated the IP address some time ago, but are actually not reached by the mesh measurement, because the measurement still targets the old IP. I attached a CSV that includes the raw data (of measurements with some form of problem), but basically there are 93 measurements from connected anchors that fail, and out of which 68 (from 29 anchors) could work, if the measurement would target the correct IP. These measurements have matching anchor/probe IPs and DNS records, so I do not know why the measurement target is stale. There are some additional measurements that could work, but it is unclear what the intended ‘correct’ IP is. On that note, there are 48 measurements that ‘work‘, i.e., they get a response from the target, but it is not clear if the target is the intended receiver: - 8 target abandoned anchors - 18 have different probe and anchor IPs and target one of them - 21 have the same probe and anchor IP but target something else Again, I am sorry for this long mail. I understand that RIPE Atlas is a huge project that has grown over time so it might be hard to keep some things synchronized, and some other things might not be easily decidable (e.g., when to mark an anchor is inactive). However, I think especially the IP address of an anchor in the /anchors and /probes APIs, in the DNS entry, and the target of the mesh/probes measurements need to be consistent. Currently some mesh measurements might target an entirely different machine. I wanted to bring some attention to this, but not sure what else I can do as a user. I don‘t want to complain too much :) For now I will just use all data sources as input and apply some sanity checks. Best, Malte P.S.: Some feedback on how we can bring the measurement of our anchor to target our anchor would be nice though. [0] https://atlas.ripe.net/probes/6425

2 2

RIPE measurement Credits required
by Mccherry, Paul (Student) 02 Nov '21

02 Nov '21

Dear All I have applied and been granted to install an Anchor at my University to generate credits to make measurements, this is taking some time to prepare the equipment etc. In the meantime I need to carry out some measurement tests for a paper I am working on. Would anybody be able to kindly send me some RIPE credits which I will hopefully pay back once I have the anchor up and running ? Regards Paul McCherry Phd Student From: ripe-atlas-request(a)ripe.net<mailto:ripe-atlas-request@ripe.net> Sent: 25 October 2021 23:07 To: ripe-atlas(a)ripe.net<mailto:ripe-atlas@ripe.net> Subject: [External] ripe-atlas Digest, Vol 122, Issue 6 This email originated outside the University. Check before clicking links or attachments. Send ripe-atlas mailing list submissions to ripe-atlas(a)ripe.net To subscribe or unsubscribe via the World Wide Web, visit https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Flists.rip… or, via email, send a message with subject or body 'help' to ripe-atlas-request(a)ripe.net You can reach the person managing the list at ripe-atlas-owner(a)ripe.net When replying, please edit your Subject line so it is more specific than "Re: Contents of ripe-atlas digest..." Today's Topics: 1. RIPE Atlas Virtual Anchor Application (TNaumann(a)telekom.de) ---------------------------------------------------------------------- Message: 1 Date: Mon, 25 Oct 2021 22:06:40 +0000 From: <TNaumann(a)telekom.de> To: <ripe-atlas(a)ripe.net> Subject: [atlas] RIPE Atlas Virtual Anchor Application Message-ID: <FR2P281MB0775F27CBE4C9FAC283EC010A6839(a)FR2P281MB0775.DEUP281.PROD.OUTLOOK.COM> Content-Type: text/plain; charset="iso-8859-1" Dear Ripe Atlas Team, Could we have any estimation about our application for the first virtual anchor in New York? We would like to have a physical and virtual probe at the same time and recycle/reuse the physical later this Year somewhere else in U.S. [cid:image001.png@01D7C9FD.22665680] Kind Regards Thomas Naumann Deutsche Telekom Technik GmbH Network Infrastructure (T-NWI) Thomas Naumann Ginnheimer Stadtweg 88, 60431 Frankfurt am Main +49 69 20060 4042 (Phone) +49 170 3374602 (Mobil) E-Mail: TNaumann(a)telekom.de<mailto:TNaumann@telekom.de> https://eur02.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.teleko…<https://eur02.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.teleko…><https://eur02.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.teleko…> Erleben, was verbindet. Die gesetzlichen Pflichtangaben finden Sie unter: https://eur02.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.teleko…<https://eur02.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.teleko…><https://eur02.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.teleko…> Gro?e Ver?nderungen fangen klein an - Ressourcen schonen und nicht jede E-Mail drucken.

10 15

Re: [atlas] [External] ripe-atlas Digest, Vol 122, Issue 8
by Mccherry, Paul (Student) 27 Oct '21

27 Oct '21

Many thanks Nick, I will pay them back as soon as possible. Regards Paul Get Outlook for Android<https://aka.ms/AAb9ysg> ________________________________ From: ripe-atlas <ripe-atlas-bounces(a)ripe.net> on behalf of ripe-atlas-request(a)ripe.net <ripe-atlas-request(a)ripe.net> Sent: Wednesday, October 27, 2021 9:20:42 PM To: ripe-atlas(a)ripe.net <ripe-atlas(a)ripe.net> Subject: [External] ripe-atlas Digest, Vol 122, Issue 8 This email originated outside the University. Check before clicking links or attachments. Send ripe-atlas mailing list submissions to ripe-atlas(a)ripe.net To subscribe or unsubscribe via the World Wide Web, visit https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Flists.rip… or, via email, send a message with subject or body 'help' to ripe-atlas-request(a)ripe.net You can reach the person managing the list at ripe-atlas-owner(a)ripe.net When replying, please edit your Subject line so it is more specific than "Re: Contents of ripe-atlas digest..." Today's Topics: 1. Re: RIPE measurement Credits required (Nick Hilliard) 2. Re: RIPE measurement Credits required (Carsten Schiefner) 3. Re: RIPE measurement Credits required (Dario Ciccarone) ---------------------------------------------------------------------- Message: 1 Date: Wed, 27 Oct 2021 21:06:27 +0100 From: Nick Hilliard <nick(a)foobar.org> To: "Mccherry, Paul (Student)" <p.mccherry(a)lancaster.ac.uk> Cc: "ripe-atlas(a)ripe.net" <ripe-atlas(a)ripe.net> Subject: Re: [atlas] RIPE measurement Credits required Message-ID: <d1cb2c10-5361-cc7e-37b8-67c3183be7eb(a)foobar.org> Content-Type: text/plain; charset=windows-1252; format=flowed Mccherry, Paul (Student) wrote on 27/10/2021 21:02: > I have applied and been granted to install an Anchor at my University to > generate credits to make measurements, this is taking some time to > prepare the equipment etc. ?In the meantime I need to carry out some > measurement tests for a paper I am working on. Would anybody be able to > kindly send me some RIPE credits which I will hopefully pay back once I > have the anchor up and running ? just sent you 50m. Nick ------------------------------ Message: 2 Date: Wed, 27 Oct 2021 22:09:56 +0200 From: Carsten Schiefner <carsten(a)schiefner.de> To: "ripe-atlas(a)ripe.net" <ripe-atlas(a)ripe.net> Subject: Re: [atlas] RIPE measurement Credits required Message-ID: <44a5f3d1-6be8-4c59-8c4b-9ce706c4578e.maildroid@localhost> Content-Type: text/plain; charset=utf-8 Your user id? -- Von meiner H?ngematte aus gesendet. -----Original Message----- From: "Mccherry, Paul (Student)" <p.mccherry(a)lancaster.ac.uk> To: "ripe-atlas(a)ripe.net" <ripe-atlas(a)ripe.net> Sent: Mi., 27 Okt. 2021 22:02 Subject: [atlas] RIPE measurement Credits required Dear All I have applied and been granted to install an Anchor at my University to generate credits to make measurements, this is taking some time to prepare the equipment etc. In the meantime I need to carry out some measurement tests for a paper I am working on. Would anybody be able to kindly send me some RIPE credits which I will hopefully pay back once I have the anchor up and running ? Regards Paul McCherry Phd Student From: ripe-atlas-request(a)ripe.net<mailto:ripe-atlas-request@ripe.net> Sent: 25 October 2021 23:07 To: ripe-atlas(a)ripe.net<mailto:ripe-atlas@ripe.net> Subject: [External] ripe-atlas Digest, Vol 122, Issue 6 This email originated outside the University. Check before clicking links or attachments. Send ripe-atlas mailing list submissions to ripe-atlas(a)ripe.net To subscribe or unsubscribe via the World Wide Web, visit https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Flists.rip… or, via email, send a message with subject or body 'help' to ripe-atlas-request(a)ripe.net You can reach the person managing the list at ripe-atlas-owner(a)ripe.net When replying, please edit your Subject line so it is more specific than "Re: Contents of ripe-atlas digest..." Today's Topics: 1. RIPE Atlas Virtual Anchor Application (TNaumann(a)telekom.de) ---------------------------------------------------------------------- Message: 1 Date: Mon, 25 Oct 2021 22:06:40 +0000 From: <TNaumann(a)telekom.de> To: <ripe-atlas(a)ripe.net> Subject: [atlas] RIPE Atlas Virtual Anchor Application Message-ID: <FR2P281MB0775F27CBE4C9FAC283EC010A6839(a)FR2P281MB0775.DEUP281.PROD.OUTLOOK.COM> Content-Type: text/plain; charset="iso-8859-1" Dear Ripe Atlas Team, Could we have any estimation about our application for the first virtual anchor in New York? We would like to have a physical and virtual probe at the same time and recycle/reuse the physical later this Year somewhere else in U.S. [cid:image001.png@01D7C9FD.22665680] Kind Regards Thomas Naumann Deutsche Telekom Technik GmbH Network Infrastructure (T-NWI) Thomas Naumann Ginnheimer Stadtweg 88, 60431 Frankfurt am Main +49 69 20060 4042 (Phone) +49 170 3374602 (Mobil) E-Mail: TNaumann(a)telekom.de<mailto:TNaumann@telekom.de> https://eur02.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.teleko…<https://eur02.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.teleko…><https://eur02.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.teleko…> Erleben, was verbindet. Die gesetzlichen Pflichtangaben finden Sie unter: https://eur02.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.teleko…<https://eur02.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.teleko…><https://eur02.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.teleko…> Gro?e Ver?nderungen fangen klein an - Ressourcen schonen und nicht jede E-Mail drucken.

1 0

RIPE Atlas Virtual Anchor Application
by TNaumann＠telekom.de 26 Oct '21

26 Oct '21

Dear Ripe Atlas Team, Could we have any estimation about our application for the first virtual anchor in New York? We would like to have a physical and virtual probe at the same time and recycle/reuse the physical later this Year somewhere else in U.S. [cid:image001.png@01D7C9FD.22665680] Kind Regards Thomas Naumann Deutsche Telekom Technik GmbH Network Infrastructure (T-NWI) Thomas Naumann Ginnheimer Stadtweg 88, 60431 Frankfurt am Main +49 69 20060 4042 (Phone) +49 170 3374602 (Mobil) E-Mail: TNaumann(a)telekom.de<mailto:TNaumann@telekom.de> www.telekom.de<http://www.telekom.de/> Erleben, was verbindet. Die gesetzlichen Pflichtangaben finden Sie unter: www.telekom.de/pflichtangaben-dttechnik<http://www.telekom.de/pflichtangaben-dttechnik> Große Veränderungen fangen klein an - Ressourcen schonen und nicht jede E-Mail drucken.

1 0

New on RIPE Labs: Latency Into Your Network - As Seen From RIPE Atlas
by Alun Davies 14 Oct '21

14 Oct '21

Dear colleagues, New prototype visualisations - put together by Emile Aben and Agustin Formoso using the ObservableHQ platform - allow you to visualise network deployment. Drawing on latency data available from RIPE Atlas, each visualisation aims at helping reveal insights about structural latency into given networks. Read more and try it out on RIPE Labs: https://labs.ripe.net/author/emileaben/latency-into-your-network-as-seen-fr… Kind regards, Alun Davies RIPE Labs Editor RIPE NCC

1 0

Training material
by Hank Nussbacher 12 Oct '21

12 Oct '21

I know of: https://www.ripe.net/support/training/material/measurements-and-tools-train… which from slide 79-176 is dedicated to explaining RIPE Atlas. Problem is that it is from July 2019. Is there a later more up to date RIPE Atlas PPT? Thanks, Hank

2 1

ripe atlas Probe 32256 is disconnected firm ware upgrade com326.193.612
by kiran.gunana＠colruytgroup.com 12 Oct '21

12 Oct '21

Dear Ripe Community, Noticed our probe's firmware got upgraded and from there on our measurements stopped working. 2021-10-10 03:31:00 UTC Probe firmware upgraded Your probe #32256 upgraded its firmware from version 5020 to version 5030 Any clue on how we can fix this, current measurements does not work and tried creating new measurements which also does not work. Old Measurement : Ping measurement to www.hln.be: ID23382497 Last successfull measurment was at 2021-10-10 02:46 New Measurement : Ping measurement to www.f5.com from probe 32256 : ID32499756 Recevied following email from ripe: Your probe 32256 has been disconnected from the RIPE Atlas infrastructure since 2021-10-10 02:39:46 UTC. You may be able to learn more about the possible cause from the "Status" tab on your probe's information page: https://atlas.ripe.net/probes/32256/#!tab-status Current status says connected and no measurement works. Kind Regards, Kiran Gunana Dit bericht is onderworpen aan de voorwaarden beschikbaar op onze website Ce message est soumis aux conditions disponibles sur notre site web This message is subject to the terms and conditions available on our website

2 1