Hello!

I have problem with my probe v3 (ID 11003, FW 4520).

First i used DHCP (at Home, for tests), all was worked fine.

Then i reconfigure my probe to Static IP (by manual). Static IP necessary to install my probe 24/7/365 in server room. We don't use DHCP.

But probe can't connect to network...

I brought probe to home, connect to DHCP network. Router give IP to probe. But probe still disconnected on atlas.ripe.net at least 3 hours...

LEDs:
1 - ON
2 - OFF
3 - Slow blink
4 - ON
5 - ON

Power reset - no result. Try to change Router cfg (ip, dns, mask) - no result. Probe still disconnected.

I read, that if set static IP - probe try to test setting.

By LEDs - "Network test"? But 3+ hours "Network test"?

DHCP work correctly (Router - Zyxell Keenetic, last firmware), PC work without problems on full autoconfiguration (IP, mask, gateway, DNS)

Can you help me?

P.S. Sorry for my english, i'm from Ukraine