Hi, On Mon, Mar 07, 2016 at 10:39:47AM +0200, Hank Nussbacher wrote:
What does that mean? I can try reseating the USB again, but if that doesn't work, it could be the USB is fried?
Try the USB stick in a "normal" PC and see whether it can be formatted there. I recently had one of mine completely break - the stick could be seen, but it was empty and all write access failed. I'm not sure what the Atlas v3 does with its USB stick, but this is the number one problem issue... maybe a new firmware version could be designed that has more advanced flash handling (like, ubifs instead of "normal" filesystems) and falls back to "not use flash if the flash is broken". What I see with my probes is that the aim of the flash buffer ("we can store measurement results if we can't upload them to the control server due to network outages etc." -> less probability of result loss) is actually backfiring into "extended downtimes of probes due to USB breakage of probes in locations where you can't just-so swap the USB flash"... (two of my 3 v3 probes have had virtually no network outages since they are operating, and the central servers also had few outages - but both have been down for weeks because I just had no time to go out, buy a new flash drive, and *drive over* to replace it - once again) Gert Doering -- NetMaster -- have you enabled IPv6 on something today...? SpaceNet AG Vorstand: Sebastian v. Bomhard Joseph-Dollinger-Bogen 14 Aufsichtsratsvors.: A. Grundner-Culemann D-80807 Muenchen HRB: 136055 (AG Muenchen) Tel: +49 (0)89/32356-444 USt-IdNr.: DE813185279