Hi, Am 01.12.2015 um 11:34 schrieb Marty Strong:
I have a dead probe that I've tried both waiting 10 minutes with the USB stick out and placing a fresh USB stick in, but it still sits on what looks like running from internal flash.
Is there another method anybody knows that can bring this old probe back to life?
https://wiki.openwrt.org/toh/tp-link/tl-mr3020#gpio_pinout I read that you can "debrick" a "home router" via the JTAG interface. But the TL-MR3020 only gives you GPIO ... maybe that works just fine, too. AFAIK RIPE does not want you to flash a probe yourself. So flashing the firmware yourself is probably not possible. But at least looking at the boot log (serial console) could maybe help you spot the problem. Best regards, Andreas