Hello! I have problem with my probe v3 (ID 11003, FW 4520). First i used DHCP (at Home, for tests), all was worked fine. Then i reconfigure my probe to Static IP (by manual). Static IP necessary to install my probe 24/7/365 in server room. We don't use DHCP. But probe can't connect to network... I brought probe to home, connect to DHCP network. Router give IP to probe. But probe still disconnected on atlas.ripe.net at least 3 hours... LEDs: 1 - ON 2 - OFF 3 - Slow blink 4 - ON 5 - ON Power reset - no result. Try to change Router cfg (ip, dns, mask) - no result. Probe still disconnected. I read, that if set static IP - probe try to test setting. By LEDs - "Network test"? But 3+ hours "Network test"? DHCP work correctly (Router - Zyxell Keenetic, last firmware), PC work without problems on full autoconfiguration (IP, mask, gateway, DNS) Can you help me? P.S. Sorry for my english, i'm from Ukraine -- С уважением, Дмитрий Личный блог: www.weblance.com.ua Хобби: www.mukachevo.net Работа: www.dovgolit.com
